1950s or '60s Omega Seamaster
1950s or '60s Omega Seamaster
Author
Discussion

onesickpuppy

Original Poster:

2,672 posts

188 months

Sunday 24th March 2013
quotequote all
Just home from dinner at my parents. We were talking about watches and I asked what had happened to my Grandad's Omega when he died 20 years ago. Anyway, long story short I'm now wearing this:



I know it's earlier than 1965, but not sure just how old. The crystal is fairly well covered in small marks and scratches.

Can anyone give me any idea of the age? The case back only has the Seahorse, OMEGA, the Omega sign and 'Waterproof' on it. I assume to get any serial number I'd need to get the back off.

Also, any recommendations for polishing the crystal or getting it replaced? I'd rather refurb than replace and it doesn't have to be perfect.

Cheers!

Caruso

7,559 posts

287 months

Sunday 24th March 2013
quotequote all
If you take the caseback off and can identify the serial number on the movement you can then cross reference it here: http://chronomaddox.com/omega_serial_numbers.html to get an approximate year of manufacture.

Edited by Caruso on Sunday 24th March 21:39

onesickpuppy

Original Poster:

2,672 posts

188 months

Sunday 24th March 2013
quotequote all
Caruso said:
If you take the caseback off and can identify the serial number on the movement you can then cross reference it here:http://chronomaddox.com/omega_serial_numbers.html to get an approximate year of manufacture.
Cheers! Might take it to the local watch guy tomorrow and also ask him about polishing the crystal.

Caruso

7,559 posts

287 months

Sunday 24th March 2013
quotequote all
onesickpuppy said:
Cheers! Might take it to the local watch guy tomorrow and also ask him about polishing the crystal.
It's a nice watch from a good brand, so it's well worth doing.

Stuart

11,639 posts

282 months

Monday 25th March 2013
quotequote all
A bit of brasso will work wonders on the crystal. You'll be surprised.

Or buy some polywatch from Amazon. Trust me, you won't do anything but improve it.

daveenty

2,385 posts

241 months

Monday 25th March 2013
quotequote all
onesickpuppy said:
I know it's earlier than 1965, but not sure just how old. The crystal is fairly well covered in small marks and scratches.

Can anyone give me any idea of the age? The case back only has the Seahorse, OMEGA, the Omega sign and 'Waterproof' on it. I assume to get any serial number I'd need to get the back off.

Also, any recommendations for polishing the crystal or getting it replaced? I'd rather refurb than replace and it doesn't have to be perfect.

Cheers!
If, as you say, it has the Omega Hippocampus (Sea-horse) then it's from 1958 onwards. They were plain backed with the just words Seamaster & Waterproof engraved on them prior to this.

As for the crystal, as others have mentioned, a tube of Poly-Watch should bring this up well.

onesickpuppy

Original Poster:

2,672 posts

188 months

Monday 25th March 2013
quotequote all
Stuart said:
A bit of brasso will work wonders on the crystal. You'll be surprised.

Or buy some polywatch from Amazon. Trust me, you won't do anything but improve it.
Cheers Stuart, I'll try some Brasso today.

Pat H

8,058 posts

287 months

Monday 25th March 2013
quotequote all
I came by my late father's Constellation in very similar circumstances.

As you can see, it was pretty well worn when I found it.



I sent it to a decent watchmaker.

It was fitted with a new glass, crown, mainspring and given a clean and service. I also asked him lightly to polish the case, as I didn't want to lose any of the patina.

I still have the gold bracelet, buy usually wear it with a leather Omega strap or the rally style strap in the photos below.




onesickpuppy

Original Poster:

2,672 posts

188 months

Monday 25th March 2013
quotequote all
Brasso works!

Before:


After:


The seconds hand has some age spots on it but apart from that it looks great!

Thanks for the advice chaps.

That Constellation is lovely, I very much like that strap.

Pat H

8,058 posts

287 months

Monday 25th March 2013
quotequote all
onesickpuppy said:
That Constellation is lovely, I very much like that strap.
Type "Hirsch Rally Calf Leather Watch Strap" into the eBay search engine.

drink

onesickpuppy

Original Poster:

2,672 posts

188 months

Monday 25th March 2013
quotequote all
Pat H said:
onesickpuppy said:
That Constellation is lovely, I very much like that strap.
Type "Hirsch Rally Calf Leather Watch Strap" into the eBay search engine.

drink
beer

Shaw Tarse

31,904 posts

234 months

Monday 25th March 2013
quotequote all
Brasso is what I used on my (grandad's ) Omega, it didn't make it perfect, but I quite like the "preloved look"
I wouldn't mind putting it on a bracelet at some point.

onesickpuppy

Original Poster:

2,672 posts

188 months

Thursday 28th March 2013
quotequote all
Right chaps, I'm after a wee bit of advice.

The watch has stopped a couple of times, and the manual wind is very stiff. Just had my local jeweller have a wee look at it and he reckons it just needs a service. It looks like some water has maybe got in under the crown at some point. This particular watch needs some sort of special tool as it has a solid case back and you go in through the front. My local guy would normally service it for circa £120 but the jeweller reckons it needs to go to Omega and it'll be £400!

Any recommendations for someone who can do the job at a reasonable price? I suppose if it went to Omega it'd get new hands, new crown and perhaps even a new crystal?

Shaw Tarse

31,904 posts

234 months

Thursday 28th March 2013
quotequote all
Personally, I'd be tempted to wear it for a few days & see if it fixed itself, though this may be a bad idea.

Ryte time has been mentioned on PH before for watch servicing.

RichB

56,487 posts

315 months

Thursday 28th March 2013
quotequote all
Indeed Rytetime (Stuart Burridge) did a great job on my Omega Speedmaster recently, easy to deal with, kept me informed and took about 4 weeks, cost £170 for mine but it's a Chrono yours should be less. Came back perfect.

tickious

1,401 posts

205 months

Thursday 28th March 2013
quotequote all
onesickpuppy said:
Right chaps, I'm after a wee bit of advice.

The watch has stopped a couple of times, and the manual wind is very stiff. Just had my local jeweller have a wee look at it and he reckons it just needs a service. It looks like some water has maybe got in under the crown at some point. This particular watch needs some sort of special tool as it has a solid case back and you go in through the front. My local guy would normally service it for circa £120 but the jeweller reckons it needs to go to Omega and it'll be £400!

Any recommendations for someone who can do the job at a reasonable price? I suppose if it went to Omega it'd get new hands, new crown and perhaps even a new crystal?
Give your local guy a try.

tickious

1,401 posts

205 months

Thursday 28th March 2013
quotequote all
daveenty said:
If, as you say, it has the Omega Hippocampus (Sea-horse) then it's from 1958 onwards. They were plain backed with the just words Seamaster & Waterproof engraved on them prior to this.

As for the crystal, as others have mentioned, a tube of Poly-Watch should bring this up well.
Good knowledge, I'll keep that one beer

onesickpuppy

Original Poster:

2,672 posts

188 months

Thursday 28th March 2013
quotequote all
tickious said:
Give your local guy a try.
He hasn't got the tool or I would frown.

tickious

1,401 posts

205 months

Thursday 28th March 2013
quotequote all
onesickpuppy said:
He hasn't got the tool or I would frown.
If it's a one piece case, it'll have a split stem. So you pull the stem out, then you just need a plastic syringe to place on the tube and blow the glass out.

RichB

56,487 posts

315 months

Thursday 28th March 2013
quotequote all
Why not Rytetime?