Casio battery replacement - excessive cost
Casio battery replacement - excessive cost
Author
Discussion

Dr_Rick

Original Poster:

1,730 posts

279 months

Monday 22nd April 2013
quotequote all
So I have a Seiko 'dive computer' watch from the '90s that has a flat battery. It's rated to 200m so I need to get it done properly, not just a shoe-repair-shop-beginning-with-T style fix. Took it to H. Samuel (not naming and shaming, they've been fine) who suggested a £45 fee but warned that Seiko could make contact and try to up the price. Well they did, they suggested that £110 was more reasonable for changing a battery and by the way the keeper was broken and needed fixing.

H. Samuel are equally surprised at how much it was going to cost and are also on my side that the keeper is not broken. Trust me the watch is pristine, not even any scratches on the mirror finish case.

So, my point, where can I go to get a battery replaced which isn't going to cost me a fortune but will leave the watch rated at 200m? The area of interest is central belt Scotland (live near Edinburgh, but work near Glasgow).

bry1975

1,246 posts

194 months

Monday 22nd April 2013
quotequote all
Dr,

Contact Martin in Glasgow-

www.martinsjewellers.co.uk/

No offence but I wouldn't go near Ratners with a barge pole best keep well away as they'll ruin your watch.

Dr_Rick

Original Poster:

1,730 posts

279 months

Monday 22nd April 2013
quotequote all
Any feelings about Jon Vincent in Hamilton (I work in East Kilbride).

They've quoted me £27.50, while-I-wait and a full pressure test to 200m. Doesn't sound bad.

bry1975

1,246 posts

194 months

Monday 22nd April 2013
quotequote all
Nope don't know them myself.

You do KNOW most firms will only have pressure testers rated to 60metres or 100metres
not many will have a 40Bar 400metre rated Roxer or higher, they might only have a case distortion wr tester or vacuum jobby.

If you dive a lot make sure they test to at least 100metres depth, as often tired gaskets might pass 30m or 60m but fail at 80m etc.


Regards


Bry

Dr_Rick

Original Poster:

1,730 posts

279 months

Monday 22nd April 2013
quotequote all
The In Time guys (within Debenhams) stated they would only test to 100m and that for a 200m watch I should look elsewhere. Jon Vincent said no problem. They apparently have in-house repair and service facilities and even have an ISO standard process for waterproofing (oooooh).

We'll see.

bry1975

1,246 posts

194 months

Monday 22nd April 2013
quotequote all
Probably be a Calypso 10Bar wet tester, if they'd said 60metres probably a Bergeon 5555 which is the watch industries standard, I'd imagine they might well have an Elma which is a non intrusive way of testing.


Cally 10Bar



Bergeon 5555


Elma




Dr_Rick

Original Poster:

1,730 posts

279 months

Monday 22nd April 2013
quotequote all
They all look very shiny, but what does it all mean in terms of what they've said they can do? I just want a watch that will perform to the spec having been opened.

bry1975

1,246 posts

194 months

Monday 22nd April 2013
quotequote all
Speak to Simon Miclhmayr I believe he's got a Roxer40 so 400m depth testing ability.

Simon Michlmayr
01603 403687