Just acquired this Omega Seamaster chronograph
Discussion
Long time lurker here in the watches section, but hopefully I have something worthwhile posting now...
I've just acquired my Father's Seamaster that he has owned for the last few years. He gave me a good deal on it and I have always admired it. I'm keen to restore it as much as I can and possibly sell on towards the end of the year or part ex for a Planet Ocean SS XL.
It's a 2004 model and long overdue a service, I have a well-reputed company local to me who have quoted me £270 for a service ( swisstimeservices), does anybody have any experience with them? Omega quoted me £450 for reference.
It has a slight defect in that the unidirectional bezel twists both ways and seems to have lost it's clicking noise. I found several references to this fault online saying that it is quite an expensive fix (usually a full bezel replacement). I went into Omega in Royal exchange yesterday and the salesman told me that he had seen it before and in fact it is only a £2 part beneath (bezel spring) that is at fault, I'd quite like a second opinion on this.
Sorry for the poor quality photo, I have cleaned it up quite nicely since taking it.

I've just acquired my Father's Seamaster that he has owned for the last few years. He gave me a good deal on it and I have always admired it. I'm keen to restore it as much as I can and possibly sell on towards the end of the year or part ex for a Planet Ocean SS XL.
It's a 2004 model and long overdue a service, I have a well-reputed company local to me who have quoted me £270 for a service ( swisstimeservices), does anybody have any experience with them? Omega quoted me £450 for reference.
It has a slight defect in that the unidirectional bezel twists both ways and seems to have lost it's clicking noise. I found several references to this fault online saying that it is quite an expensive fix (usually a full bezel replacement). I went into Omega in Royal exchange yesterday and the salesman told me that he had seen it before and in fact it is only a £2 part beneath (bezel spring) that is at fault, I'd quite like a second opinion on this.
Sorry for the poor quality photo, I have cleaned it up quite nicely since taking it.

Yup those stainless ratchet springs soon work harden and the pawls simply break off.
Imo the hardest job is removing them Omega bezels not easily unless you have the correct tool BEEN there done that.
If you're stingy you can reuse the old ratchet spring and can probably make the ratchet pawls more durable, works well on Tag Heuers also!
Bry
Imo the hardest job is removing them Omega bezels not easily unless you have the correct tool BEEN there done that.

If you're stingy you can reuse the old ratchet spring and can probably make the ratchet pawls more durable, works well on Tag Heuers also!
Bry
Don't pay £275 an aftermarket insert(cost £10-£20) will fit you just need plastic pliers to CAREFULLY click the sprung insert into place.
And this well respected Omega seller will happily fit Omega bezel inserts fitting cost about £10.
Item number:261200279919
Bry
And this well respected Omega seller will happily fit Omega bezel inserts fitting cost about £10.
Item number:261200279919
Bry
Edited by bry1975 on Tuesday 30th April 17:17
Edited by bry1975 on Tuesday 30th April 17:18
Thanks for the replies so far
DJFish said:
My 300m chrono diver is with STS at the moment, it's overdue a service and the bezel insert fell off the other day.
If I can't find the insert they have to replace the whole bezel adding £200 to the cost
I'm hoping I can find the insert!
I'd be tempted to just get an aftermarket insert as bry suggested. STS are just down the road to me, I'm planning on popping in next week to try and speak to an engineer about my broken bezel. The salesman from Omega even gave me the part number for the spring so I'm hoping I'll arrive well informed.If I can't find the insert they have to replace the whole bezel adding £200 to the cost

I'm hoping I can find the insert!
Gassing Station | Watches | Top of Page | What's New | My Stuff



