Ultrasonic cleaning?
Ultrasonic cleaning?
Author
Discussion

mat777

Original Poster:

10,714 posts

191 months

Sunday 5th May 2013
quotequote all
Is this the best way to clean a watch with the ingrained dirt, dried sweat etc of having worn it for many years? I am about to re-strap the watch but want to clean it first, a wet cloth doesnt seem to shift the stuff. Does a watch have to be waterproof to be immersed in an ultrasonic bath?

Maz_uk

590 posts

229 months

Sunday 5th May 2013
quotequote all
Have you tried warm soapy water and an old toothbrush or nail brush?

That's what I normally do and the watch comes up very clean.

clockworks

7,814 posts

176 months

Sunday 5th May 2013
quotequote all
Not a good idea to put a complete watch in an ultrasonic cleaner. All sorts of nasty things can happen, even if it's "waterproof".
Stick to soapy water and a toothbrush for a properly waterproof watch, dry or damp cloth and a toothpick for a non-waterproof (or suspect waterproof) watch.

If it has any value, get it done professionally, or invest in some tools and take the movement out before cleaning.

mat777

Original Poster:

10,714 posts

191 months

Sunday 5th May 2013
quotequote all
Thanks guys, I will try to get hold of a nailbrush and do it that way

DSLiverpool

16,577 posts

233 months

Sunday 5th May 2013
quotequote all
I'm a dealer in ultrasonic baths (long story but my mates the biggest importer so I sell them as well) you NEVER put the actual watch in as the tiny tiny bubbles and the vibrations will kill it but you get a watch holder with most models that just puts the strap in the water - it really works well on metal straps but use a cleaning agent either sea clean or a drop of fairy liquid in warm water.

Expect to pay £35 for a decent one for occasional home use, the are great on car light lenses as well etc etc

bry1975

1,246 posts

194 months

Sunday 5th May 2013
quotequote all
Imo ultrasonic cleaners are great for cleaning gritty bracelet, I'd pour in BOILING water and a little fairy would work a treat, *Tho I WOULDN'T RECOMMEND boiling water as it warps the part tray*

Vieste

10,532 posts

191 months

Monday 6th May 2013
quotequote all
Methylated spirits and a few cotton buds.

ecain63

10,653 posts

206 months

Tuesday 7th May 2013
quotequote all
I use ultrasonics every day as a goldsmith. Watches are not something i'd put in one whilst its set to vibrate. Its fine to leave them to soak in the bath for an hour or so whilst it warms up (i never turn the temp above 60C as i feel its too hot for the plastics above that). Once its been soaked just use a toothbrush to work around the case and strap. If its really grubby then you can dip the strap into the bath with the US on vibrate but id really be wary about dipping the case.

Dont put your fingers in there either whilst its vibrating. Bone and its marrow does not like high frequency vibration. Cancer is linked to this.

Eddie

mat777

Original Poster:

10,714 posts

191 months

Thursday 9th May 2013
quotequote all
Thanks guys, I went at it today with the back of an old penknife to gently scrape off the crusty bits, then a vigorous wipe over with a damp cloth. It certainly looks a lot better now smile
The end result can be seen over in the wrist check thread