Stupid question - tools
Stupid question - tools
Author
Discussion

JREwing

Original Poster:

17,551 posts

210 months

Friday 17th May 2013
quotequote all
I just want a set of small screwdrivers for adjusting links etc. Preferably better than Christmas cracker quality
Does anybody have a set they can recommend, or is it all the same? I should stop ruining pins with a kitchen knife/paying enormous amounts to a man in a shop

Tanguero

4,535 posts

232 months

Friday 17th May 2013
quotequote all
Depends how much you want to spend - as set can cost anything between £3.99 and several hundred.

I started out with an Indian made set costing around £15 - they were perfectly fine for light use so I would say something like T-S 144SD on this page http://www.rnhorological.co.uk/screwdrivers.htm would be a reasonable starting point.

The trick is to get them (and keep them) in good shape by touching up the blades with a fine oilstone to remove any burrs or rough spots, and to always use the right size screwdriver for the screw.



Edited by Tanguero on Friday 17th May 17:00

bry1975

1,246 posts

194 months

Friday 17th May 2013
quotequote all
Another tip most quality bracelets with link screws are LOCTITED to prevent accidental loosening, best
bet is to remove the bracelet from the watch case and heat the screws to 100c+, this will soften the loctite bond.

You can undo the screws without heating but as mentioned above you need perfect fitting screwdriver blades, try and buy screwdrivers with rotating tops as they reduce the blade from slipping or camming out.

Bry

JREwing

Original Poster:

17,551 posts

210 months

Friday 17th May 2013
quotequote all
Well, I won't be doing anything more than resizing bracelets and changing bracelets/straps, to be honest. Thanks for the tips, I suppose I just need to make sure that I have the right range of drivers!

bry1975

1,246 posts

194 months

Friday 17th May 2013
quotequote all
Be VERY CAREFUL if you're removing screws from expensive watches as they can soon become churned up and
replacement screws aren't always easy to replace etc.


CardShark

4,264 posts

210 months

Friday 17th May 2013
quotequote all
Bergeon yes

JREwing

Original Poster:

17,551 posts

210 months

Friday 17th May 2013
quotequote all
Yeah, I've learnt the screw thing the hard way!
Thanks for all the suggestions smile

bry1975

1,246 posts

194 months

Friday 17th May 2013
quotequote all
AF are GOOD also.

Tanguero

4,535 posts

232 months

Friday 17th May 2013
quotequote all
CardShark said:
Bergeon yes
Sorry, I can't agree. They are massively over priced and their latest version beryllium bronze blades are as fragile as glass. If you really want quality screwdrivers, Voh make the best set I have ever had. The are not cheap though and would be overkill for adjusting bracelets occasionally.

CardShark

4,264 posts

210 months

Saturday 18th May 2013
quotequote all
For clarity, my recommendation was based more on other people's previous responses when this question had been asked before both here and elsewhere, I've personally never used them. The only tool I use now is the one that came with my Sinn UX which appears to be 10 times better than a really cheap equivalent I bought of the 'net some time back smile