Centre mounted strap? How odd...
Centre mounted strap? How odd...
Author
Discussion

airbrakes

Original Poster:

10,714 posts

191 months

Monday 20th May 2013
quotequote all
A friend of mine needs a new strap for his watch, but every jeweller so far has told him they cant help. Now i see why - its like nothing I've ever seen before:




How on earth does this mount? Whats holding the strap on at either side? A normal strap is obviously designed for the bar to pass through it at either end I can only guess this strap has sealed ends so the bars are half length with one springy end, which locate into the centre lug? Its the only way I can see it working as there is no threaded bar running all the way through the strap?
Can anyone help? Slight complication - the new strap cannot be leather, "for animal rights reasons".

thanks,
matt

clockworks

7,814 posts

176 months

Monday 20th May 2013
quotequote all
It's a standard strap, with a notch cut into it. Can be done with a sharp knife, or you can buy the proper tool to cut the notch.
Most likely held in with single pin, press fit into the case lug.

andy tims

5,606 posts

277 months

Monday 20th May 2013
quotequote all
Can you see how the spring bar fits in?

If you cut a notch in a standard strap, I'd imagine the spring bars might fall out.

Justayellowbadge

37,057 posts

273 months

Monday 20th May 2013
quotequote all
Usually the two t bar pieces screw in to the centre lug.

It's a very, very, common design.

I've had Cartier and Dunhill watches like that.

andy tims

5,606 posts

277 months

Monday 20th May 2013
quotequote all
Justayellowbadge said:
Usually the two t bar pieces screw in to the centre lug.

It's a very, very, common design.
So a standard strap, suitably notched (as per the photo but neatly done) would do it.

As for sourcing a faux leather strap Google is your friend.

airbrakes

Original Poster:

10,714 posts

191 months

Monday 20th May 2013
quotequote all
Thanks guys, I will have a look around. I presume the t-bar pieces are hidden in the edges of the strap in that photo which is why it looks like its held on by magic?


Turn7

25,786 posts

252 months

Monday 20th May 2013
quotequote all
MrsTurn7 says you've obviously been to crap jewellers as her work have a special tool for making the cutout in the strap.

Not an unusual fit at all.

andy tims

5,606 posts

277 months

Tuesday 21st May 2013
quotequote all
NeMiSiS said:
PS. If you put a new strap on that watch you will double its value.
biglaughbiglaugh

airbrakes

Original Poster:

10,714 posts

191 months

Wednesday 22nd May 2013
quotequote all
andy tims said:
NeMiSiS said:
PS. If you put a new strap on that watch you will double its value.
biglaughbiglaugh
Oi, behave... the person I'm asking on behalf of has a link to this thread! Not everyone is a PH company director with a collection of Rolexes tongue out

Craikeybaby

12,179 posts

256 months

Wednesday 22nd May 2013
quotequote all
My Nixon Rover is similar, but not quite as extreme. Rather than the first link being one of the wide plastic pieces of the strap, it is one of the small metal links, so I've been unable to source a replacement strap (and had to get a GShock instead).


Nixon Rover by Lewis Craik, on Flickr

Flying Toilet

3,621 posts

242 months

Sunday 26th May 2013
quotequote all
I sold those watches when I worked for Land Rover Gear. They were st. Tons were bought back in for refunds...