Dropped my Panerai and the strap broke!
Dropped my Panerai and the strap broke!
Author
Discussion

Thankyou4calling

Original Poster:

11,045 posts

204 months

Saturday 25th May 2013
quotequote all
The lug adjacent to the watch body fell off leaving the strap (titanium and stainless steel) dangling. It's a luminor marina 44mm. Would it be something say Timpson could fix or need an authorised dealer?

DH01

820 posts

199 months

Saturday 25th May 2013
quotequote all
Any blacksmith should be able to sort it out . . .

RichTT

3,266 posts

202 months

Monday 27th May 2013
quotequote all
The entire lug fell off??

Pics, please.

Crusoe

4,126 posts

262 months

Monday 27th May 2013
quotequote all
Is it a fake? Think the force to break the side lug off that would be much larger than a drop from a few feet. Can probably get a new body from panerai if you took it to a dealer for repair.

Edited by Crusoe on Monday 27th May 14:41

Oily Nails

2,932 posts

231 months

Monday 27th May 2013
quotequote all
Luminor don't exactly have "dainty" lugs!
Its either seriously unlucky and localised porosity in the original casting that somehow didn't appear on the external faces after machining?
or
Maybe, if second hand, someone rehoused the mechanicals into a cheap replacement casing after original was damaged?

Either way pics!

Thankyou4calling

Original Poster:

11,045 posts

204 months

Monday 27th May 2013
quotequote all


Hope the pic comes out. It's definitely not a fake. I must say I was shocked when it popped off and there isn't any part missing.

Oily Nails

2,932 posts

231 months

Monday 27th May 2013
quotequote all
Ahhh a link went, that's more understandable, still not good mind.

Thankyou4calling

Original Poster:

11,045 posts

204 months

Monday 27th May 2013
quotequote all
Do you know how it's secured and any suggestions ref repair?

marcosgt

11,506 posts

207 months

Monday 27th May 2013
quotequote all
Presumably there's a pin or a screw to hold the links together, although you might think twice about taking an expensive watch like a Panerai to Timpsons, I imagine it's fairly easy to put right.

M

Grey Ghost

4,611 posts

251 months

Monday 27th May 2013
quotequote all
Thankyou4calling said:
Do you know how it's secured and any suggestions ref repair?
If you aren't recommended a local jeweller to you then a trip to Lakeside Shopping Centre might fix it. On the 1st floor outside the entrance to M&S is a watch repair place that looks professional enough and has a reasonable selection of pre-owned stuff for sale.

Pesty

42,655 posts

287 months

Monday 27th May 2013
quotequote all
marcosgt said:
Presumably there's a pin or a screw to hold the links together, although you might think twice about taking an expensive watch like a Panerai to Timpsons, I imagine it's fairly easy to put right.

M
It will have been a long 'screw' that fell out. Hopefully it fell out not snapped. I'm guessing that's why the watch was dropped in the first place?


You may want to check all the others are tight with a correct size and decent jewellers screwdriver.

You may even want to unscrew them and put some mild thread lock in there.

Shouldn't be hard to source a new one and sort it yourself.

Will look something like this.

You could unscrew one of the others to measure the size. You can get them from many sources.

http://www.ebay.com/itm/20-X-GENUINE-SCREWS-PAM-PA...

Edited by Pesty on Monday 27th May 19:49

The GMan

2,508 posts

286 months

Monday 27th May 2013
quotequote all
Thankyou4calling said:


Hope the pic comes out. It's definitely not a fake. I must say I was shocked when it popped off and there isn't any part missing.
When you said lug had snapped, I thought you meant the ones attached to the case which the strap contacts too.

The strap snapping is not good but understandable. I would check with any good jewellers and they will be able to help. Could also be an opportunity to get a nice Toshi strap to alternate with too.

Good friend of mine after a night out with me at Christmas got back to his hotel and drunkingly put his newish Ceramic sub on the chair in his room. Rushing to get ready the following morning as he had slept in he put his case on the chair in almost a push back sliding motion. Came into the office and the strap on the Sub had bent really badly along with the clasp. It looked terrible but he got it sorted at his AD up in Glasgow for not to much money to at all.

Pesty

42,655 posts

287 months

Monday 27th May 2013
quotequote all
Hard to tell on that pic but if that end link is snapped then the only place to get a new one will be a panerai dealer. Hopefully they can just get that link.


Be prepared it will be expensive. Those bracelets are about a grand.

BluePurpleRed

1,138 posts

257 months

Tuesday 28th May 2013
quotequote all
Pesty said:
It will have been a long 'screw' that fell out. Hopefully it fell out not snapped. I'm guessing that's why the watch was dropped in the first place?


You may want to check all the others are tight with a correct size and decent jewellers screwdriver.

You may even want to unscrew them and put some mild thread lock in there.

Shouldn't be hard to source a new one and sort it yourself.

Will look something like this.

You could unscrew one of the others to measure the size. You can get them from many sources.

http://www.ebay.com/itm/20-X-GENUINE-SCREWS-PAM-PA...

Edited by Pesty on Monday 27th May 19:49
This sounds like great advice. Seems what the problem is to me...

Zigster

2,005 posts

175 months

Thursday 30th May 2013
quotequote all
The photo just shows up as an X for me.

But do you mean it is a metal bracelet rather than a strap? The ones nearer the "buckle" have screws (so you can adjust the length of the bracelet) but I don't think the ones nearer the lugs have screws (at least, not that you can get to).

As a stop gap while you get it fixed (a new Panerai bracelet was about £1,500 last time I looked), you can easily pick up a leather strap for very little money which gives you a different look for a change.