SKX007 Bezel insert replacement
SKX007 Bezel insert replacement
Author
Discussion

JohnoVR6

Original Poster:

708 posts

243 months

Thursday 30th May 2013
quotequote all
Hi all,

Rarely do I comment, let alone start a thread, in this section but I'm wondering if someone can help?

A few weekends ago, I damaged the black insert section of my SKX007's bezel on a metal pole. I thought I'd scratched the glass too, but the damage seems to be contained to that bit. Having looked around online there are replacement inserts available, but the ones I've found through ebay and the like, are all non-genuine, despite being in Seiko bags and so forth.

So, is it possible to find a genuine replacement, or are the non-genuine items still a good fit? Or as a tempting alternative, is it possible to source custom colours? And finally, how hard is it to replace the insert? - I have no experience of attempting anything similar, so its safe to assume unless its a 30 second job that involves little more than basic tools - I'll cock it up.

Apologies if this has been asked before, I did search, but the results seemed to revolve around people asking about creation...

John

bry1975

1,246 posts

194 months

Thursday 30th May 2013
quotequote all
Hi,

Give KKH services a bell in Guildford.

01483 533702

info@kkhservices.co.uk

The thin blade of a Swiss army knife will remove the old insert heating(boiling water
with bezel removed from watch case) the insert prior to removal softens the adhesive tape.

Bry



Edited by bry1975 on Thursday 30th May 22:08

CardShark

4,264 posts

210 months

Thursday 30th May 2013
quotequote all
As bry has said, the inserts are only stuck on by an adhesive so a little careful prising with a blade will remove it. 10watches have a good selection of (non Seiko branded) inserts if bry's recomendation doesn't work out, or google yobokies for alternatives. Anything sourced from these guys will be a perfect fit as long as you make sure that they're for your model of Seiko, I've used 10watches myself smile

Edited by CardShark on Thursday 30th May 21:43

ed335d

395 posts

207 months

Thursday 30th May 2013
quotequote all
John

I may well have one.

I won't 100% know for a couple of days, as my bits & bobs box is inaccessible due to some building work.

Changing them is pretty easy.

Ed

Ev_

190 posts

294 months

Friday 31st May 2013
quotequote all
Make sure you use a wide blade to lever the bezel off the case. Try anything narrow, like a jeweller's screwdriver, and you'll probably dent the metal on the bezel and/or watch case. A case opening tool like this works nicely and is well worth the 99p investment!

Once the bezel is off, you'll be able to remove the old insert quite easily.

Unless there's plenty of adhesive left behind, you'll also need a new adhesive strip to attach the new insert. 10watches do these. (Maybe OE inserts come with adhesive – I'm not sure – but the aftermarket ones generally don't.)

Now reattach the bezel to the watch (and turn it to the desired position) before you stick the new insert to it. That way you can make sure the insert is aligned with 12 o'clock perfectly. You'll want to get it right first time, too, because each time you remove an insert there's a chance you could bend it or chip the paint on it.

It's a ten-minute job and quite easy really. Best of luck!

Edited by Ev_ on Friday 31st May 13:42