What model Omega Seamaster is this...?
Discussion
I have just bought this watch from a local jeweller, and would like to know a bit more about it.
Dimensions are:
width including crown 41mm, width excluding crown 36mm, 12mm thick, lug width 18mm.
It is automatic, and obviously 'pre-coaxial era', and as can be seen has the 'helium escape valve' at 10 o clock on the bezel.
I can also read the serial number on one of the lugs, so can I use this to identify the year/model ?
On that note, the bezel is very stiff, and I do not want to force it, so any advice on getting that to work would also be appreciated !
I am sure some of the more knowlegeble PH'ers on here can tell me more...
thanks in advance
Thanks for the quick response !
It currently has a new Hirsch leather strap, which is OK for now, but I would quite like to source an original steel bracelet to complete the watch.
Just bought it yesterday, so far very pleased with it, and for the price I think it will be a reasonable 'investment' ( that is the excuse for buying it anyway !!)
Any ideas about where to find a bracelet, apart from the obvious bay of E ?
It currently has a new Hirsch leather strap, which is OK for now, but I would quite like to source an original steel bracelet to complete the watch.
Just bought it yesterday, so far very pleased with it, and for the price I think it will be a reasonable 'investment' ( that is the excuse for buying it anyway !!)
Any ideas about where to find a bracelet, apart from the obvious bay of E ?
They are, and usually your only options are an AD or picking up a used one from eBay or a forum.
I wanted a bracelet for my Speedmaster, which came (used) on a leather strap, but I balked at the cost of a real one.
I bought one from Alpha instead and, aside from the lack of an Omega logo on the clasp, it's pretty hard to tell the difference.
They do one for the Seamaster too (not sure it'll fit the OP's model) - http://www.alpha-watch.com/details.php?myid=837
Price is low enough to be worth a gamble anyway!
M
I wanted a bracelet for my Speedmaster, which came (used) on a leather strap, but I balked at the cost of a real one.
I bought one from Alpha instead and, aside from the lack of an Omega logo on the clasp, it's pretty hard to tell the difference.
They do one for the Seamaster too (not sure it'll fit the OP's model) - http://www.alpha-watch.com/details.php?myid=837
Price is low enough to be worth a gamble anyway!
M
The bezel on these are always stiff. As it is small and it can be difficult to turn as your fingers appear to engulf the bezel! - But nothing to worry about.
As mentioned above, this is a mid size SMP but sourcing a bracelet is going to be very expensive, probably almost as much as you paid for the watch!
Omega do a lovely rubber strap with a deployant which looks awesome.
Chris
As mentioned above, this is a mid size SMP but sourcing a bracelet is going to be very expensive, probably almost as much as you paid for the watch!
Omega do a lovely rubber strap with a deployant which looks awesome.
Chris
Hi OP,
I think the watch is a 2532.80.00 (ref for a 41mm pre co-ax 300m seamaster), if it was originally supplied on a bracelet.
The bezel's tend to accumulate all manner of crap which makes them stiff to turn. Warm soapy water and an old tooth brush should dislodge some of it, and ease the bezel up.
For 75CHF you can get an extract from the Omega factory archive, if the watch was produced before 2000. You'll need to get the case back off and make a note of the movement number. Here's a link to the Omega site.
http://www.omegawatches.com/spirit/history/extract...
DH
I think the watch is a 2532.80.00 (ref for a 41mm pre co-ax 300m seamaster), if it was originally supplied on a bracelet.
The bezel's tend to accumulate all manner of crap which makes them stiff to turn. Warm soapy water and an old tooth brush should dislodge some of it, and ease the bezel up.
For 75CHF you can get an extract from the Omega factory archive, if the watch was produced before 2000. You'll need to get the case back off and make a note of the movement number. Here's a link to the Omega site.
http://www.omegawatches.com/spirit/history/extract...
DH
Thanks Dominic, appreciate your advice as always.
Having done some research on getting an Omega bracelet... as has been mentioned, even a good S/H one would cost me nearly as much as I paid for the watch....which is ridiculous really.
I quite like it on the leather anyway, it looks a bit more discreet.
But if I can find a 1502-824 bracelet at a really good price, then I may get it just to 'complete' the watch. I can afford to be patient...!
Having done some research on getting an Omega bracelet... as has been mentioned, even a good S/H one would cost me nearly as much as I paid for the watch....which is ridiculous really.
I quite like it on the leather anyway, it looks a bit more discreet.
But if I can find a 1502-824 bracelet at a really good price, then I may get it just to 'complete' the watch. I can afford to be patient...!
Gassing Station | Watches | Top of Page | What's New | My Stuff



