Modifying watches - a new hobby for me?
Discussion
As I've mentioned before on these pages I have a battered, old Seiko 5 (SNK603 according to the internet) with a good 7S26 movement. I never wear it - it seems like a good starting point for this.
Do you do it? Where do you get tools and parts? Is there a good forum anywhere for this sort of thing?
It would be more fun than leaving the watch in a box!
Do you do it? Where do you get tools and parts? Is there a good forum anywhere for this sort of thing?
It would be more fun than leaving the watch in a box!
This site gives a good idea of what is involved in dismantling a Seiko 5 movement
http://www.clockmaker.com.au/diy_seiko_7s26/
and this thread offers sound advise on tools
http://forums.watchuseek.com/f6/getting-started-gu...
http://www.clockmaker.com.au/diy_seiko_7s26/
and this thread offers sound advise on tools
http://forums.watchuseek.com/f6/getting-started-gu...
Thanks, Tanguero.
I've just stumbled across this:
http://forums.watchuseek.com/f21/beautiful-seiko-p...
I could sign up and ask, but before I do I wonder if anyone here knows. I have that base watch - can anyone tell me how I go about getting a quote/ ordering the parts?
I can't find the hands on the Yobokies site, and I'm not sure about the case.
I've just stumbled across this:
http://forums.watchuseek.com/f21/beautiful-seiko-p...
I could sign up and ask, but before I do I wonder if anyone here knows. I have that base watch - can anyone tell me how I go about getting a quote/ ordering the parts?
I can't find the hands on the Yobokies site, and I'm not sure about the case.
I've got a spare automatic movement for sale if you want to butcher something that isn't quite right. Your first time will always involve a lot of fumbling and awkwardness with little chance of a good outcome. 
Unless you just mean you want to change hands and dials... (mind you, there's still a good chance of f
king up
).

Unless you just mean you want to change hands and dials... (mind you, there's still a good chance of f
king up
).Open an account with https://www.cousinsuk.com/
They stock a large range of movement, parts and tools and are highly likely to have some hand you like that will fit a Seiko 5, if that is your bag.
If you are going to play around inside the movements the best advice is to buy a box of junk mechanical movements on eBay and practice dismantling on them - the first few (dozen) times you do it you will destroy them. Only when you can strip and reassemble a junk movement without breaking it further, then graduate onto a good movement. It takes time, technique and repetition to learn to manipulate parts without damage.
ETA: Disclaimer : I am in no way responsible for damage to your bank balance once you start buying watch tools and parts...
They stock a large range of movement, parts and tools and are highly likely to have some hand you like that will fit a Seiko 5, if that is your bag.
If you are going to play around inside the movements the best advice is to buy a box of junk mechanical movements on eBay and practice dismantling on them - the first few (dozen) times you do it you will destroy them. Only when you can strip and reassemble a junk movement without breaking it further, then graduate onto a good movement. It takes time, technique and repetition to learn to manipulate parts without damage.
ETA: Disclaimer : I am in no way responsible for damage to your bank balance once you start buying watch tools and parts...
Edited by Tanguero on Wednesday 17th July 17:02
JRewing said:
Hmm, maybe I should get someone who knows to do it.
But I still have to source the hands and case!
But I still have to source the hands and case!

The guy who runs TheWatchForum.co.uk can do it for you.
Thing is, to learn anything, they say you'll end up ruining a few movements on the way so best get hold of cheap ones*. If your grandad gave you his old Patek chrono, it's best not to remove the case and have a tinker.

*- I hope this isn't true for colorectal trainee surgeons, though.
JRewing said:
Thanks to you both.
I could find someone to do it, but a dead ten year old Seiko 5 I barely wear wouldn't upset me too much.
I do have a hideous quartz Gucci of 1990s vintage which was my father's which I would love to destroy
If you are only changing hands and dial then its fairly straightforward with little risk of mangling the movement first time if you are careful. Cousins should be able to provide you with a range of hands and all the tools you will ever need. For more budget tools try http://www.rnhorological.co.uk/ lower quality, but perfectly adequate for occasional hand swapping.I could find someone to do it, but a dead ten year old Seiko 5 I barely wear wouldn't upset me too much.
I do have a hideous quartz Gucci of 1990s vintage which was my father's which I would love to destroy

Hoofy said:

The guy who runs TheWatchForum.co.uk can do it for you.
Thing is, to learn anything, they say you'll end up ruining a few movements on the way so best get hold of cheap ones*. If your grandad gave you his old Patek chrono, it's best not to remove the case and have a tinker.

*- I hope this isn't true for colorectal trainee surgeons, though.
Tanguero said:
If you are only changing hands and dial then its fairly straightforward with little risk of mangling the movement first time if you are careful. Cousins should be able to provide you with a range of hands and all the tools you will ever need. For more budget tools try http://www.rnhorological.co.uk/ lower quality, but perfectly adequate for occasional hand swapping.
Thanks again. You've given me a few sites to browse tomorrow afternoon. I'll have a look through and see what appeals 
JRewing said:
Hoofy said:

The guy who runs TheWatchForum.co.uk can do it for you.
Thing is, to learn anything, they say you'll end up ruining a few movements on the way so best get hold of cheap ones*. If your grandad gave you his old Patek chrono, it's best not to remove the case and have a tinker.

*- I hope this isn't true for colorectal trainee surgeons, though.
No!JRewing said:
Hoofy said:
Why? I don't get it.
Sorry, I was just suggesting that maybe you were denied in your attempt to become a colorectal surgeon as a result of your practice methods 

Gassing Station | Watches | Top of Page | What's New | My Stuff


