Not a great start for new watch...
Not a great start for new watch...
Author
Discussion

Iroquois Plisken

Original Poster:

100 posts

163 months

Monday 15th July 2013
quotequote all
I finally bought a new Tag Heuer Aquaracer 500m yesterday afternoon from a reputable jeweller that I've been lusting over for a few weeks.

This morning I go to put the watch on and notice it's stopped. It's automatic, so not having worn it since I bought it yesterday, it needs winding. I give it a few shakes and it starts up, although the time is now not correct. The young lady set the time and date for me before I left the jewellers and away it went into the box until this morning.

So I unscrew the crown (the 500m has a screw-down crown) to adjust the time, and this happens:


Gutted. I don't understand how this could have happened? I had the previous version of this watch (albeit quartz not automatic) so I know how to adjust the time/date and treated the crown with the utmost care.

Back to the jewellers I guess and I'll have to wait for a replacement!


Vvroom

1,170 posts

221 months

Monday 15th July 2013
quotequote all
Bad luck OP.

That photo brings to life a few comments made on the other current Tag thread.

Hope you get it sorted swiftly.

Nice looking watch, by the way.

Chicane-UK

3,861 posts

216 months

Monday 15th July 2013
quotequote all
I seem to read a lot of negative comments about Tag Heuer these days.. not only in general quality, but also after service as well. I think I'd be demanding a refund and not wanting to send it back for repair as you could be waiting weeks or months to get it back.

Iroquois Plisken

Original Poster:

100 posts

163 months

Monday 15th July 2013
quotequote all
Thanks for the replies everyone.

My thoughts are echoing those of Chicane - I've not even worn it yet and had it in my posession less than 24 hours so I won't accept it being sent off for a repair. I'll be looking for an identical replacement or a refund out of this.

My other two choices before I got this were either a Hamilton Khaki X-Wind or an Omega Seamaster (black dial). I opted for the Tag on the basis of it's all-black theme and highest water resistance but I'm thoroughly disappointed with this kind of durability.

I still prefer the look of the Tag over my other two alternatives, I find the others a little to shiny for my taste. So it looks like I have some thinking to do for the next couple of hours before I return it.

That Longines is also a valid alternative!

littleredrooster

6,417 posts

227 months

Monday 15th July 2013
quotequote all
Do I remember reading that this is a known weakness and recurring problem?

bry1975

1,246 posts

194 months

Monday 15th July 2013
quotequote all
I wouldn't really blame Tag Heuer as I'm assuming the watch movement is ETA based no excuse BUT should be a 30mins fix.

anonymous-user

85 months

Monday 15th July 2013
quotequote all
Take it back, get it exchanged or buy another brand.

I've got an Aquaracer as my daily beater, it's been faultless.

All brands have their 'off days', I had an IWC that was a total disaster, it was back and forth for repair about 10 times before I demanded a full refund, but it wouldn't put me off buying another.

Iroquois Plisken

Original Poster:

100 posts

163 months

Monday 15th July 2013
quotequote all
littleredrooster said:
Do I remember reading that this is a known weakness and recurring problem?
Some of the older models had a problem where the crown threads were easily stripped, this wasn't the problem I had as it still screwed and unscrewed just fine. I had the older model for 3 years and it never stipped its threads.

This new one is a new model, smaller case and apparently resolved the old crown problem.

I took it back this afternoon and another is on it's way to me, should be ready to pick up on Friday. No fuss, no arguing, sorted. I'll be testing the replacement before I leave the shop though! hehe

bry1975

1,246 posts

194 months

Monday 15th July 2013
quotequote all
Some of the Omega SMPs also have the KNOWN weak threads replaced a few casetubes on one model, often an over lengthed stem will cause premature thread wear.

hilly10

7,543 posts

259 months

Tuesday 16th July 2013
quotequote all
NeMiSiS said:
Aprox £700 Less than yours and IMHO twice the watch.
http://www.chisholmhunter.co.uk/longines-hydroconq...

Good Luck.
Plus one. Great watch for the money