Gucci 8900l Spruce up (sentimental value)
Gucci 8900l Spruce up (sentimental value)
Author
Discussion

Squadrone Rosso

Original Poster:

3,719 posts

178 months

Friday 16th August 2013
quotequote all
This was my wife's first nice watch. The gold plating on the bezel is wearing thin so I'd like to get it changed for her.

Kits are available off eBay etc for c£60. Any recommendations for supply & fit in the UK or fit only?

Thanks,

Simon

Edited by Squadrone Rosso on Friday 16th August 03:28

Squadrone Rosso

Original Poster:

3,719 posts

178 months

Wednesday 21st August 2013
quotequote all
Just bumping this, sorry. Surely there is someone on PH who could tackle this job for me?

andy tims

5,606 posts

277 months

Wednesday 21st August 2013
quotequote all
Ryte Time

Squadrone Rosso

Original Poster:

3,719 posts

178 months

Thursday 22nd August 2013
quotequote all
Thanks. Just googled. Mixed views. Their web page is incomplete so no contact us etc.

Tanguero

4,535 posts

232 months

Thursday 22nd August 2013
quotequote all
The problem is going to be that it is extremely difficult to make a satisfactory job of re-plating a watch. The original plate needs to be removed completely down to bare base metal, then the base polished before applying a seed layer of copper plate then the final gold. You can't just put more gold over a worn plate, it won't adhere and will show every mark of the underlying surface.

The watch you mention doesn't have a bezel in the traditional sense. From the pictures on the web it appears that the 'bezel' is integrated with both the case and the bracelet and would be nigh on impossible to remove from the case. If it is possible to re-plate it at all, I suspect it would be a very expensive job.

Squadrone Rosso

Original Poster:

3,719 posts

178 months

Thursday 22nd August 2013
quotequote all
Thanks.

This is what I meant by bezel, sorry. More a case.

http://www.ebay.co.uk/itm/NIB-Gucci-Replacement-Ca...

Looks like you just swap the movement over.

Tanguero

4,535 posts

232 months

Thursday 22nd August 2013
quotequote all
Ahhh - that makes sense. Almost any jeweler that offers watch repairs should be able to do that for you. Indeed is is simple enough to do yourself with minimal tools if you are so inclined.

Tanguero

4,535 posts

232 months

Thursday 22nd August 2013
quotequote all
Tanguero said:
Ahhh - that makes sense. Almost any jeweler that offers watch repairs should be able to do that for you. Indeed it is simple enough to do yourself with minimal tools if you are so inclined.