Where to get Clerc serviced?

[FarmyardPants]

I have an early Clerc hydroscaph GMT Power Reserve GMT-1.1.1 (looks like this but without the lume blob on the seconds hand: https://www.jurawatches.co.uk/products/clerc-watch... ) that needs a service.
It has stopped, I suspect mainspring failure.
I approached a watch service place I found online and they advised me that Clerc had been mothballed due to the pandemic and that parts would be hard to source.
Any recommendations? Thanks for any advice..

Edited by FarmyardPants on Sunday 9th October 20:32

[Mezzanine]

I cannot be of any help but thanks for expanding my knowledge, I had never heard of the brand before.

I’d imagine they would probably use either a stock or modify stock movement known to the industry so a decent watch repair place should be able to help or at least provide a more detailed response.

A lot of people from these parts recommend ringing Joe at Anglesey Watch & Clock. He is always very busy though so you might have to be patient.

[FarmyardPants]

Thanks for the reply. They are lovely watches. This model uses the Calibre C610 movement.

I’ll give Joe a call, I’m happy to wait. Thanks again.