737 had a screw loose
Author
Discussion

Ayahuasca

Original Poster:

27,580 posts

308 months

Saturday 6th August 2016
quotequote all
Flying to somewhere the other day I happened to notice what appeared to be a loose bolt sticking out of the starboard wing. Any ideas what it is?


Defcon5

6,465 posts

220 months

Saturday 6th August 2016
quotequote all
Did you notice it mid air? Could have caused quite a stir had you broadcast your observation to the whole cabin biggrin

Ayahuasca

Original Poster:

27,580 posts

308 months

Saturday 6th August 2016
quotequote all
Mid air but quite near to landing, so I just mentioned it to the cabin crew on exiting and they called the captain. He looked at the pic and said he would get an engineer to check it out.

Eric Mc

125,606 posts

294 months

Saturday 6th August 2016
quotequote all
Was the aeroplane in a steep vertical climb?

Wobbegong

15,078 posts

198 months

Saturday 6th August 2016
quotequote all
No, he had a stewardess straddling him thumbup

Jamesgt

851 posts

262 months

Saturday 6th August 2016
quotequote all
Looks like a blob of grease to me but I'm looking on the phone so its blurry.

eharding

14,648 posts

313 months

Saturday 6th August 2016
quotequote all
Ayahuasca said:
Flying to somewhere the other day I happened to notice what appeared to be a loose bolt sticking out of the starboard wing. Any ideas what it is?

Landing gear indicator pin? - we have these on the Yak (out of 12 gear indicator bulbs, chances are at least one of them will have blown...), but never heard of them on a 737. Think DC10s used to have them though.

Jamesgt

851 posts

262 months

Saturday 6th August 2016
quotequote all
It's just a screw sticking up. This panel has that problem. Chances are there will be a couple of others in that panel which aren't so obvious. Quick whack with a big hammer will stick it back down. biggrin

G600

1,479 posts

216 months

Sunday 7th August 2016
quotequote all
Jamesgt said:
It's just a screw sticking up. This panel has that problem. Chances are there will be a couple of others in that panel which aren't so obvious. Quick whack with a big hammer will stick it back down. biggrin
Yeah this, nothing to worry about really, although I prefer the screwdriver method personally, fewer anchor nuts to replace that way laugh

Simpo Two

92,662 posts

294 months

Sunday 7th August 2016
quotequote all
Could've been worse...


Sylvaforever

2,212 posts

127 months

Monday 8th August 2016
quotequote all
what is that?

sherman

15,199 posts

244 months

Monday 8th August 2016
quotequote all
Picture of a faraday cage (sp)

Countdown

49,227 posts

225 months

Monday 8th August 2016
quotequote all
Episode from the Twilight Zone.. smile

Simpo Two

92,662 posts

294 months

RCBRG

603 posts

170 months

Monday 8th August 2016
quotequote all
often you would be allowed 10% of the screws missing (location dependant) so nothing to worry about

nessiemac

1,800 posts

270 months

Monday 8th August 2016
quotequote all
RCBRG said:
often you would be allowed 10% of the screws missing (location dependant) so nothing to worry about
10%??? What airline do you work for?eek

Soov535

35,829 posts

300 months

Monday 8th August 2016
quotequote all
RCBRG said:
often you would be allowed 10% of the screws missing (location dependant) so nothing to worry about
yikes

Trevatanus

11,349 posts

179 months

Monday 8th August 2016
quotequote all
nessiemac said:
RCBRG said:
often you would be allowed 10% of the screws missing (location dependant) so nothing to worry about
10%??? What airline do you work for?eek
Air France...

getmecoat

Munter

31,331 posts

270 months

Monday 8th August 2016
quotequote all
RCBRG said:
often you would be allowed 10% of the screws missing (location dependant) so nothing to worry about
Are we still talking about the wing or the mental state of the crew?

Simpo Two

92,662 posts

294 months

Monday 8th August 2016
quotequote all
Maybe they put in 10% too many to start with, to allow for 10% falling out?