Ultimate Yorkshire Puddings
Author
Discussion

jdwoodbury

Original Poster:

1,372 posts

235 months

Wednesday 10th February 2010
quotequote all
Ok this is a common problem, my Yorkshire Puddings can vary wildly and I often have to rely on Aunt Bessie to bail me out....not anymore though.

This recipe below works every time

http://www.bbcgoodfoodme.com/bbcGF/recipes/Default...

Give it a try you will not be dissapointed smile

I had to post it as I relaise for many this is an eternal struggle.

Murph7355

41,954 posts

285 months

Thursday 11th February 2010
quotequote all
The key to good Yorkshires is

- dripping. Oil can work but it's nowhere near as good
- VERY hot oven
- fat in your pan until it's smoking/spitting
- well beaten mixture
- pour and get in the oven immediately
- don't dick around with opening the oven door every 5mins

I never measure the ingredients out, using colour and texture as the guides. The above are the important bits.

deevlash

10,442 posts

266 months

Thursday 11th February 2010
quotequote all
I made my first ever one the other week, not bad for a first go I thought!

whitechief

4,432 posts

224 months

Thursday 11th February 2010
quotequote all
deevlash said:
I made my first ever one the other week, not bad for a first go I thought!
looks like a good one but is that a coping saw next to it?


K50 DEL

9,721 posts

257 months

Thursday 11th February 2010
quotequote all
Way back in 2007, a thread on Yorkshires was the first time I used the bookmark function on PH - I've still not had time to test any of the recipies though!!

http://www.pistonheads.com/gassing/topic.asp?h=0&a... Yorkshire Puds

deevlash

10,442 posts

266 months

Thursday 11th February 2010
quotequote all
whitechief said:
deevlash said:
I made my first ever one the other week, not bad for a first go I thought!
looks like a good one but is that a coping saw next to it?
its a cutting wire, its sitting on a cheese board.

zakelwe

4,449 posts

227 months

Thursday 11th February 2010
quotequote all
jdwoodbury said:
Ok this is a common problem, my Yorkshire Puddings can vary wildly and I often have to rely on Aunt Bessie to bail me out....not anymore though.

This recipe below works every time

http://www.bbcgoodfoodme.com/bbcGF/recipes/Default...

Give it a try you will not be dissapointed smile

I had to post it as I relaise for many this is an eternal struggle.
Nothing beats Aunt Bessie mainly because you can spend the time you spent doing what is in effect a puffed batter on what matters. Ok, if you are doing it for yourself and the york pud is the main attraction then fair enough, but most york pudds are cooked in an environment where tension is extreme.

So I always go for the easy way out and spend the extra time on the meat.

Even with pudding I always use Aunt Bessies, ie

Heat up 2 Aunt Bessie's york puds in the oven
When they are ready put 1 large dollop of best vanilla ice cream in each. Do not cut corners here, best you can afford.
Drizzle with Maple syrup.

Total time, less than 5 minutes for the pudding, you can do it as the plates are clearing, and it is so unctuous.

Mmmmmmmmmmmmm

Andy


Edited by zakelwe on Thursday 11th February 21:38

whitechief

4,432 posts

224 months

Thursday 11th February 2010
quotequote all
deevlash said:
whitechief said:
deevlash said:
I made my first ever one the other week, not bad for a first go I thought!
looks like a good one but is that a coping saw next to it?
its a cutting wire, its sitting on a cheese board.
wink I thought you might have created a Yorkshire pudding of such epic proportions that only a saw would suffice.

K50 DEL

9,721 posts

257 months

Friday 12th February 2010
quotequote all
zakelwe said:
Nothing beats Aunt Bessie
I can only assume you've never eaten a proper, home-made Yorkshire pudding.

There's no place for Aunt Bessie on a proper Roast Beef dinner plate!!

The Riddler

6,565 posts

226 months

Friday 12th February 2010
quotequote all
whitechief said:
deevlash said:
whitechief said:
deevlash said:
I made my first ever one the other week, not bad for a first go I thought!
looks like a good one but is that a coping saw next to it?
its a cutting wire, its sitting on a cheese board.
wink I thought you might have created a Yorkshire pudding of such epic proportions that only a saw would suffice.
I thought that upon first inspection. Good work though, it's 7.30am and I'm thinking about sticking the oven on. lick

Davey S2

13,394 posts

283 months

Friday 12th February 2010
quotequote all
zakelwe said:
jdwoodbury said:
most york pudds are cooked in an environment where tension is extreme.

Edited by zakelwe on Thursday 11th February 21:38
I really dont understand this comment.

AMLK

407 posts

214 months

Friday 12th February 2010
quotequote all
I always use the same, easy recipe for my puddings and it has never failed so far. Thet always rise well - sometimes too well!

1 cup flour, 1 cup of eggs and 1 cup of milk - mix very well and leave to stand for 10mins before pouring into pudding tray.

Don

28,378 posts

313 months

Friday 12th February 2010
quotequote all
Zak - just get the other half to do it!

My missus simply wouldn't stand for roast beef dinner without proper, home-made Yorkshires. We have a split oven and I let her use the top one whilst the bottom one takes care of the roast beef and spuds. yes

Bob the Planner

4,695 posts

298 months

Friday 12th February 2010
quotequote all
Your starter (ie Pudding) should be placed under the roast beef (or other meat), after removing the roasting tray, on a high oven for the last 15 minutes of cooking. Let the beef drip into the pudding whilst it cooks and the outside of the beef colours. Remove the beef to allow it to rest whilst eating the pudding. Use the roasting tray remnants to make the gravy preferably with a lump of Burdalls gravey salt (waste not want not !)

Serve pudding with grated horseradish.

kazste

6,115 posts

227 months

Saturday 13th February 2010
quotequote all
do a search for toad in the hole and check out 10 pence short's recipe. i use it now religiously as it is fantastic and has never failed me.

also everytime i use i always think i must thank him so here goes.

cheers 10 pence short, from me and the missus smile

Pferdestarke

7,192 posts

216 months

Saturday 13th February 2010
quotequote all
Good old James Martin's recipe is the one for me which sees fiendish golden growths appear in your oven in no time.

http://www.bbc.co.uk/food/recipes/database/yorkshi...

10 Pence Short

32,880 posts

246 months

Saturday 13th February 2010
quotequote all
kazste said:
do a search for toad in the hole and check out 10 pence short's recipe. i use it now religiously as it is fantastic and has never failed me.

also everytime i use i always think i must thank him so here goes.

cheers 10 pence short, from me and the missus smile
Ohh, I've gone red, thank you. I am a Yorkshireman, after all. wink

The OPs recipe link seems pretty much spot on. The trick is to mix everything carefully and have plenty of heat. No opening the oven door half way through, either!


Nigel H

2,238 posts

239 months

Monday 10th January 2011
quotequote all
Where can I be going wrong?

When I got my new Neff oven last year all was good, and I could turn out fluffy yorkshires at will. Now all I can I cook are pancakes frown

I have tried 3 types of plain flour, fresh eggs, different oil, fat. To no avail.

The oven is hot enough, the fat smokes, the mixture sizzles when it goes in. I even bought.an oven thermometer, which shows the oven is nice and hot. I can cook fresh pizzas, bread and cakes OK.

So I'm baffled. I've changed everything, but I still can't get back to where I was. I think it's the oven, but what can I check.

Any ideas?

Ross1988

1,234 posts

212 months

Monday 10th January 2011
quotequote all
Totally off topic, but I ate at my girlfriends parents house the other week, and our starter was Yorkshire pudding with gravy, what the hell thinks I! They were bloody awesome!

Now everytime I make a roast (not often) There's Yorkshires no matter what (not necessarily for starters) But it was a weird starter!


Nigel H

2,238 posts

239 months

Tuesday 11th January 2011
quotequote all
Paddy.

Not yet, but I'll give it a try. Will report back