Chevy engine cradle

[deadscoob]

Does anyone know where I can get a chevy engine cradle, similar to the one in the link below, but from the UK?

http://www.eastwood.com/1000-lb-small-block-chevy-...

Cheers

[V8Dom]

ive only seen them on Ebay, but shipping is £60+

[Steve_D]

Ask Frost.co.uk they don't have them on their web site but they are agents for Eastwood.

I do have a very similar frame (minus casters) but plan to use it shortly when my engine comes out.

Would not be difficult to make one.

Steve

[Kit2Kar]

May help on ebay

CHEVY V8, 454kg Engine Storage Cradle, 158857E

£69.99 plus £9.99 postage

may be what you are looking for

[BogBeast]

or even

http://www.ebay.co.uk/itm/Wolf-4-Wheel-360-Degree-...

which looks identical to the above

[ian_uk1975]

Problem with those cradles is they use the bellhousing mounts at the rear, which means you're screwed if you want to dial-in the bellhousing.

I've got a set of these...

http://www.eastwood.com/moto-feet-engine-stand-ste...

Was v.lucky to find mine on ebay.com and the seller agreed to ship them to me (shipping cost more than my winning bid, but was worth it).

[Storer]

Mine just sits on an engineers trolley on blocks even with the transmission attached.

Agreed, I can't remove the sump or rotate the engine. But why would I want to, it was brand new a couple of months ago and is being fitted pretty much bog standard.

Stand cost - nothing - I already had it!!

Paul