Discussion
If I were ordering a new Ultima, I would go for silver/gray. Silver with black trim looks great! I'm sure you will make a good choice.
Actually, go to google.com and enter Ultima GTR and then click on the images link on the top left. There are 100s of pictures to help choose a good color.
Good Luck.
Jim
Actually, go to google.com and enter Ultima GTR and then click on the images link on the top left. There are 100s of pictures to help choose a good color.
Good Luck.
Jim
I have the yellow and it is most impressive particularly when stood alongside any other yellow car.
If I were starting a build today it would be the new green.
BRG does not look right at all. Silver is for Mondeos.
Not convinced by your engine choice.
It looks like it is both too tall and too long with those front pulleys. Engines to go in an Ultima need as much room as possible at the front as they are almost touching the front bulkhead.
Steve
If I were starting a build today it would be the new green.
BRG does not look right at all. Silver is for Mondeos.
Not convinced by your engine choice.
It looks like it is both too tall and too long with those front pulleys. Engines to go in an Ultima need as much room as possible at the front as they are almost touching the front bulkhead.
Steve
Steve_D said:
Not convinced by your engine choice.
It looks like it is both too tall and too long with those front pulleys. Engines to go in an Ultima need as much room as possible at the front as they are almost touching the front bulkhead.
Steve
Just what I was thinking, not with that crank pulley anyway and you'd have to lose those stacks!!It looks like it is both too tall and too long with those front pulleys. Engines to go in an Ultima need as much room as possible at the front as they are almost touching the front bulkhead.
Steve
ETS Isn't silver a spray job only, as in not available in gel coat?
Edited by F.C. on Monday 12th September 08:04
drunyon said:
See here http://www.pistonheads.com/gassing/topic.asp?h=0&a...4th post down for my black Can-Am, and lots of other colours if you page through.
cliveg said:
See here http://www.pistonheads.com/gassing/topic.asp?h=0&a...
4th post down for my black Can-Am, and lots of other colours if you page through.
Noooo, ssshhhhhhh, I'm building a black Can Am, no one else is allowed :P4th post down for my black Can-Am, and lots of other colours if you page through.
I asked for pictures of cars painted with all their color options, but the factory didn't have a portfolio? When I get ready to order, I will ask for a sample color chip? BRC, yellow, silver.....
As for the stacks!!! That's the Can Am look. Just cut four holes in the trunk and listen to the air suck!
Check out this youtube..http://www.youtube.com/watch?v=bOtZx9-nwCo
As for the stacks!!! That's the Can Am look. Just cut four holes in the trunk and listen to the air suck!
Check out this youtube..http://www.youtube.com/watch?v=bOtZx9-nwCo
Steve_D said:
I have the yellow and it is most impressive particularly when stood alongside any other yellow car.
If I were starting a build today it would be the new green.
BRG does not look right at all. Silver is for Mondeos.
Not convinced by your engine choice.
It looks like it is both too tall and too long with those front pulleys. Engines to go in an Ultima need as much room as possible at the front as they are almost touching the front bulkhead.
Steve
shorten them stacks and that will fit, as its a sbc they have more room in front of them.If I were starting a build today it would be the new green.
BRG does not look right at all. Silver is for Mondeos.
Not convinced by your engine choice.
It looks like it is both too tall and too long with those front pulleys. Engines to go in an Ultima need as much room as possible at the front as they are almost touching the front bulkhead.
Steve
Gassing Station | Ultima | Top of Page | What's New | My Stuff



