Door solenoids help needed....

[Graham-P]

I need help from the electronics/electrical gurus out there.
Im in the process of losing my door locks on top of the doors and fitting solenoids (fitted) operated by a push button (fitted)
Now my knowledge of electrics could be put on a pin head!!
I was hoping to let the alarm disable/able the circuit that controls the door opening button via relays, but it seems that I have a negative pulse central locking that apparently will not do the job. Is there a way of getting the alarm central locking pulse when arming to disable the door button and when disarming to put power back to the button?
Is this at all possible any help would really be appreciated.

Graham

[spatz]

I understand that you want to open the doors with your solenoids and a push button when the alarm is deactivated and disable the function with the alarm engaged, so nobody can enter the car pushing the door button ?
If you have a wiring diagram of your alarm system I can help.

[Graham-P]

Hi Uwe, I have PM'd you.

Graham