LS6 Engine Parts

[Rhino]

I don't really post on here that often, but was wondering if anyone help.

I have a LS6 that I'm installing into a RX7, and I'm after the standard GM ECU, power steering pump, alternator, tensioner pulleys, water pump, throttle body & the starter motor. Can anyone point me in the right direction of where I can get these items in the UK please? Apart from the water pump I'd prefer them to be second hand.

Currently my only option is to import from the states, which I don't mind doing but I thought I'd see if I could get these items in the UK first.

I've posted this up in the Monaro section as well.

Thanks

[AndyandChrisGTR]

Sorry cant help for the uk but. I was going to suggest American speed in the states but not much use I suppose.

Chris

[Storer]

Try Parts World Performance http://partsworldperformance.com/ for new parts. They may even know of a supply for s/h.


Paul

[teamHOLDENracing]

Rhino said:

I don't really post on here that often, but was wondering if anyone help.

I have a LS6 that I'm installing into a RX7, and I'm after the standard GM ECU, power steering pump, alternator, tensioner pulleys, water pump, throttle body & the starter motor. Can anyone point me in the right direction of where I can get these items in the UK please? Apart from the water pump I'd prefer them to be second hand.

Currently my only option is to import from the states, which I don't mind doing but I thought I'd see if I could get these items in the UK first.

I've posted this up in the Monaro section as well.

Thanks

I have the following LS6 parts for sale if they are of any use....


7 NGK BR7EFS Spark plugs - Used
2 NGK BR7EFS Spark plugs - New

8 NGK B8EFS Spark Plugs - Used
8 NGK B8EFS Spark Plugs - New

8 Bosch injectors (tested one race ago) - Used

1 2 part fuel rail with male fittings for dash 6 fuel lines - Used
Suitable for the FAST intake

1 FAST composite intake for 90mm throttle body - only 7 races old
(suitable for heads with Cathedral ports)

1 FAST 90mm throttle body (cable drive)
Note: has 10mm hole drilled in throttle butterfly
which needs sealing/brazing over and butterfly
re-attaching to spindle. No throttle position sensor - New - needs fettling


1 Crank sensor - Used
1 Crank sensor - New

7 Coil packs - Used
8 Coil packs on LS6 mounting rail - Used


1 Manley intake valve: 2.00" Part no 11360-1 - New
1 Manley exhaust valve: 1.575" Part no 11363-1 - New

1 Standard alternator bracket (top right mounting) - Used

[Rhino]

Thanks for the prompt responses, they've been useful.

Funny thing is that I've already used parts world performance to get rebuild parts, such as the gaskets etc.

Once again thanks