TORQUE WRENCH SETTINGS

[BenGTR]

Hi,

in the build manual there are some torque settings, however as I'm no native speaker I'm unsure what is what .




Lower ball joints = B
Upper ball joints = A
Track rod end to steering arm = ?
Track rod end locknut = ?


Any help is highly appreciated .

Edited by BenGTR on Sunday 24th February 16:49

[Storer]

BenGTR said:

Hi,

in the build manual there are some torque settings, however as I'm no native speaker I'm unsure what is what .




Lower ball joints = B
Upper ball joints = A
Track rod end to steering arm = D
Track rod end locknut = If you peel back the rubber gaiter there should be a locknut on the threaded part of the rack to tighten against the ball end.


Any help is highly appreciated .

Paul

[BenGTR]

Thanks

However with my tools quite difficult to torque the track rod end locknut, guess something like this is needed?


(bottom left)

[macgtech]

Just remember to copper grease them before putting them together!

[BenGTR]

Do you mean this thread?

[Storer]

BenGTR said:

Do you mean this thread?

Yes.



Paul