steering boss
Author
Discussion

XASLTD

Original Poster:

104 posts

173 months

Thursday 15th August 2013
quotequote all
wtf how are you supposed to mark the holes when you cant get in to mark them.....who designs this stuff? a blind man?

XASLTD

Original Poster:

104 posts

173 months

Thursday 15th August 2013
quotequote all
any ideas greatly received....ta

Pointblank

40 posts

230 months

Thursday 15th August 2013
quotequote all
Put masking tape on top and snap a pencil short enough to fit?

Storer

5,024 posts

238 months

Thursday 15th August 2013
quotequote all
Use a scribe with a 90deg bend to mark each hole.



Paul

XASLTD

Original Poster:

104 posts

173 months

Friday 16th August 2013
quotequote all
scribe ordered...ta :-)

Steve_D

13,801 posts

281 months

Friday 16th August 2013
quotequote all
Put button head screws in the threaded holes.
Mask the top of the flange but don't press the tape down to hard.
Position the crush zone on the tape and give it a tap with a mallet.
The heads of the screws will leave a dent in the masking tape.

Steve

XASLTD

Original Poster:

104 posts

173 months

Friday 16th August 2013
quotequote all
Steering wheel fitted....looks awesome thanks people. X