Crank centerline to clip clearance Can Am

[arthurr]

Does anyone know what the measurement is from the centerline of the crank to the rear clip on a Can Am. I am attempting to determine what induction system will fit in the engine compartment.
Thanks

[tuxman]

hi arthurr .can.t measure from center of crank engine is in the way !! but from the top of the chasis rail above fuel tank to top i my injection plenum is 14" this fits under the clip by 1/2" don,t know if that will help . simon

[craig-ultima]

I have a GTR not a CanAm, but I would recommend that you also check if its the same distance along the length of the engine. It isn't on the GTR, but then the rear clip slopes upwards towards the front.