Oil pressure sender

[rossins]

Need some help please, fitting a new oil pressure sender after one of the terminals broke & I forgot to note the wiring before taking the old one off. It is a VDO sender & the terminals are marked G & WK, wires are both white one with a thin brown stripe & THE OTHER WITH A THICK BROWN STRIP. Cant ring the factory as they will have gone home.

Cheers
simon

[ditto]

rossins said:

Need some help please, fitting a new oil pressure sender after one of the terminals broke & I forgot to note the wiring before taking the old one off. It is a VDO sender & the terminals are marked G & WK, wires are both white one with a thin brown stripe & THE OTHER WITH A THICK BROWN STRIP. Cant ring the factory as they will have gone home.

Cheers
simon

If you put them the wrong way round all that will happen is when you turn on the ignition the oil pressure gauge needle will go right over

Keith

Edited by ditto on Tuesday 5th September 20:07

[steve_d]

White/Brown---WK
Brown/White---G

Steve

[rossins]

Thanks for the information.

simon