Discussion
Had a similar problem with the needle flicking at speeds above 90mph. Gapped the sensor to 1.5mm and still had the issue. Then I took the sensor off and noticed that the front of the sensor had been clipped by the toothed wheel on the drive shaft at some point in it's life. Replaced the sensor £50.00 plus VAT from Ultima and regapped again to 1.5mm. The problem has gone away.
S
S
Another cause is very simple: My speedo worked well until one day it made the same stupid jittering than yours....As I looked after it I found a bit of tire abraison and dirt of the street on and around the sensor. Just cleaned it properly and everything worked well again.
Lutz, Germany
Lutz, Germany
Edited by lvjost on Wednesday 27th June 07:33
Gassing Station | Ultima | Top of Page | What's New | My Stuff



