Porsche gearbox oils
Porsche gearbox oils
Author
Discussion

highflyer

Original Poster:

1,901 posts

255 months

Thursday 4th June 2009
quotequote all
I was just wondering what oil I should put it my Porsche 4 speed gearbox and diff and what quantity please, I have written down on a scrap of paper, Castrol EP90 and 3 1/2 litres but would like to check with you guys 1st, thanks.

Steve_D

13,802 posts

287 months

Thursday 4th June 2009
quotequote all
I use Comma SX75W-90 GL5 which is a semi synthetic.

Steve

highflyer

Original Poster:

1,901 posts

255 months

Thursday 4th June 2009
quotequote all
thanks steve but how much should I put in ?

Steve_D

13,802 posts

287 months

Thursday 4th June 2009
quotequote all
3.5L

Steve

GTRCLIVE

4,193 posts

312 months

Thursday 4th June 2009
quotequote all
Steve_D said:
I use Comma SX75W-90 GL5 which is a semi synthetic.

Steve
Steve he's got a 930 4 speed box.... different to the later units, so may take alittle less....

Also I used that Comma and the diff wore out, I then used the Mobile version and also wore the diff out..... Would suggest using that thicker Porsche oil... Ask Blue Satin he has the specs......

The problem is normally the diff contact point is in the oil level, but inverting the box brings the contact point above the oil level, so you need the nice clingy thick oil to help keep it lubed...

ROWDYRENAULT

1,294 posts

243 months

Friday 5th June 2009
quotequote all
California Motor Sports CMS suggests Swepco I believe 321. The people that do my Renault Transaxel, Transaxel Engineering in Chatsworth also suggest Swepco. Both of these shops have great reputations and both have treated me really well over the years. Lee

peterpsg

813 posts

263 months

Friday 5th June 2009
quotequote all
I used Swepco in my G50/21 6 speed when I had Quaife put an LSD in it as it was recommended on a porker forum, it certainly seemed to be a good oil, and I no problems shifting gears with it...

highflyer

Original Poster:

1,901 posts

255 months

Friday 5th June 2009
quotequote all
I am going to go with swepco but where the hell do you buy it from ? been to a couple of motorfactors today and they don't stock it or couldn't recommend anybody either thanks.

Captain Slog

375 posts

226 months

Friday 5th June 2009
quotequote all
highflyer said:
I am going to go with swepco but where the hell do you buy it from ? been to a couple of motorfactors today and they don't stock it or couldn't recommend anybody either thanks.
Swepco Link

Hope that helps

60mph

254 posts

214 months

Saturday 6th June 2009
quotequote all
Isn't the point here that the porsche unit is a trasaxle and as such has gearbox gears and hypoid bevel gears sharing the same oil . "Problem" is that the hypoid gears will not last in standard gearbox oils but need the hypoid element . Therefore the transaxle must be filled with an EP type oil . Straight gearbox oils will not do even if they are top of the range . Whether or not the hypoid gear contact points are immersed in oil I think is irrelevant .

Frank

cortina1

443 posts

248 months

Sunday 7th June 2009
quotequote all
I have some unopened Swepco 201 (1 x US gal) sitting in my garage languishing from old Ultima days- if this is the stuff you are after give me a shout and I will send on, I do remember I got it from a supplier detailed on the Porche forum

andygtt

8,345 posts

293 months

Monday 8th June 2009
quotequote all
I used to use the same oil that the G50 uses and used to put just over 3 litres in it, if you overfill it the same amount you would a G50 its not a disaster it will gradually throw the excess out the breather.


CanAm Dave

939 posts

253 months

Monday 8th June 2009
quotequote all
I use Mobil 1 SHC 75W-90 as recommended by Porsche and CMS for my G96/50. This box takes 4 litres.

Regards Dave