Side Scoop installation

[San Diego GTR]

For the recent side scoops, does anyone have any suggestions for a secure but removable installation? I was going to use a bonding compound, like a panel adhesive, but that is permanent. I may need to remove the condenser or do some other work that requires access through the side vent opening.

I was thinking silicon, like we seem to use for all sorts of things on the car, and a couple of rivets at the top and bottom near the opening, but wondered if there is a better idea out there.

Thanks
Paul

[spatz]

i used rivnuts that will allow me to take them off from outside even with grills installed, if you need pics let me know

[San Diego GTR]

spatz said:

i used rivnuts that will allow me to take them off from outside even with grills installed, if you need pics let me know

I'd love to see a picture or two.
Thanks,
Paul

[spatz]

for the fact that I sprayed everything with stone chips protection there is not much to see any more .....

[San Diego GTR]

Thats ok, can you describe where you fitted the rivnuts?
Paul

[spatz]

luckily found a pic that I did while installing them, pic is showing where I placed the rivnuts so they can later
be accessed from outside with a looong tool.