SVA ?

[steve_D]

Does the SVA sharp edges requirement include the underside of the dash?
The mounting plate for the Air Con and in my case the mounting for the fire bottle just have 1,6mm sheet edges.
Should I look at covering it with carpet offcuts etc?
Steve

[gtrclive]

The lip of that plate under the dash definatly yes, where's the bottle ?

[steve_D]

Bottle sits above passengers left leg.
What have other people done? I.e. edging strip etc.
Steve

[gtrclive]

There is horizontal plain 150mm up from where you bum sits in the seat, below that plain is free and you don't need 2.5mm Radius on anything, also there is a similar plain from the bottom of the steering wheel, between these plains you have to have 2.5mm Radius on everything the SVA standard Ball will touch. I had to put some edging on the top of my pedals as it was in the zone.

I think that makes sense ....

>> Edited by gtrclive on Sunday 7th March 17:40