cill closures

[gtr-gaz]

Hi,

Have'nt posted anything recently, been too busy with work.

Fitted the fibreglass cill closures yesterday.
Went quite well really considering how tricky they are to get the angles right.

Anyway, on sealing the joint to the sidepod I used masking tape on either side (just like CJ's and Bob's site)After applying the black goo I smoothed it out with a smear of WD40 on my finger and pulled the masking tape straight off.
It made a great finish.
BTW I used those latex rubber gloves £3.50 for 100
Found out from experience that the sealant supplied by the factory is impossible to get off your hands!

Gary

[Stig]

Gary - WD40 takes the sealant off your hand a treat!

[gtrclive]

S**t, it wish I knew that before it took about a week to get those black bits of my hands....