Problems playing 3d bluray!

[calum_ek]

Just bought a new 55" Sony 3D LED tv and when i try to play a 3d bluray through my ps3 and AV reciever, a message apperas saying i need a 3d capable player or display??

I've tried with a number of different 3D blurays and still keep getting the same message.

TV is a KDL-55EX723
PS3 updated to firmware 4.0
Reciever is an Onkyo TX-NR509
All HDMI cables are 1.4 compatible

TV Mmanual says the display should automatically adjust when a 3d signal is being dispalyed.

Help! What am i doing wrong!

Anyone had this bother before?

[headcase]

Im guessing your Blu-Ray is connected to the Amp then the Amp to the TV? If so just try to connect the Blu-Ray directly to the TV, it is possible your amp isnt 3D compatible, if it is then it is possible there is an HDMI handshaking issue, I had this recently with a NAD amp and Panasonic projector, turning them all off and on again usualy fixes it until it cocks up again.
Also im not well up an the PS3's firmware level but its worth checking if you havent already that you have the latest version with the 3D support.

ETA, just googled your amp and it does have 3D support, so likely a handshake issue.

Edited by headcase on Thursday 29th December 20:32

Edited by headcase on Thursday 29th December 20:35

[calum_ek]

Cheers, will try switching off/back on and see if this cures it.

[headcase]

The one at work does it randomly but it is the Amp at fault, its only done it since putting a NAD amp in.

[calum_ek]

It's working now! Just switched everything off and back on and a new 3D setup screen appeared so it must've been a handshake issue somewhere.

[headcase]

I should have been in IT