Decorating our Lounge - any cables I have missed?
Discussion
Hi all, I'm re-decorating our lounge and I have drawn up a list of what I need to include:-
speaker cable for 5 speakers plus outdoor and kitchen speakers - from Amp
3 x sub cables, 1 for outdoor 2 for the lounge in different places in case I need to move them
HDMI cable to TV and one to PJ too
Power cable to TV and to PJ plus 12v trigger cable in case I ever get an electric screen
Network cable to TV in case I ever get a smart TV
2 x USB cable to TV to mount a webcam for skyping plus one spare
I will be using homeplugs from the router into a switch for Amp, Bluray, TV, PS3, NAS, Sat/freeview box etc
Power and signal cable for TV to front door camera.
In view of what I will be doing, can anyone think of anything else I need to include?
Also, I need to buy a chunk of speaker cable, prob around 100m so would something like the following in the link be adequate:-
http://www.amazon.co.uk/Mutec-Cable--Speaker-2-5mm...
For the spec and length, is this a good price? Any PH'er do a better deal at all?
thanks
speaker cable for 5 speakers plus outdoor and kitchen speakers - from Amp
3 x sub cables, 1 for outdoor 2 for the lounge in different places in case I need to move them
HDMI cable to TV and one to PJ too
Power cable to TV and to PJ plus 12v trigger cable in case I ever get an electric screen
Network cable to TV in case I ever get a smart TV
2 x USB cable to TV to mount a webcam for skyping plus one spare
I will be using homeplugs from the router into a switch for Amp, Bluray, TV, PS3, NAS, Sat/freeview box etc
Power and signal cable for TV to front door camera.
In view of what I will be doing, can anyone think of anything else I need to include?
Also, I need to buy a chunk of speaker cable, prob around 100m so would something like the following in the link be adequate:-
http://www.amazon.co.uk/Mutec-Cable--Speaker-2-5mm...
For the spec and length, is this a good price? Any PH'er do a better deal at all?
thanks
Also, I will be chasing the walls out for the cables so do I need insulated speaker cable or would this be sufficient:-
http://www.amazon.co.uk/100m-Quality-14AWG-Speaker...
I realise this is copper coated rather than pure copper so bearing in mind one of the runs will be about 15m, would this have much of an impact?
http://www.amazon.co.uk/100m-Quality-14AWG-Speaker...
I realise this is copper coated rather than pure copper so bearing in mind one of the runs will be about 15m, would this have much of an impact?
I used audioquest Flx ,14/4 and 14/2 under the false floor and into audio connections in the wall for banana plugs to the speakers. Works a treat.
When I remember, I'll post a couple of pics, the boxes were from eBay http://pages.ebay.com/link/?nav=item.view&id=2...
K.
When I remember, I'll post a couple of pics, the boxes were from eBay http://pages.ebay.com/link/?nav=item.view&id=2...
K.
lots and lots of power sockets and I would possibly up the ante on network cables - everything is networked these days - TV, DVD, Bluray, network TV players such as Youview although you could have just a gigabit switch which would do the job.
also agree with the two coaxial - one for TV and one for possible PVR type thingymybob unless you are going completely online
also agree with the two coaxial - one for TV and one for possible PVR type thingymybob unless you are going completely online
Edited by sparkyhx on Tuesday 20th May 21:46
It won't be that long before we have amps with Dolby Atmos in them (or a similar equivalent) so you might want to run cables to the ceiling/height positions for them. However, having tried 9.2 in my room (and dropped back down to 7.2) I think it might be a bit overkill for home cinema.
PAULJ5555 said:
What is this? I have an electric Screen (just one from ebay) How does it connect up?
Well I am not too sure but assumed you coukd buy screens with a trigger input as my previous Yamaha amp had a couple of 12v triggers, presumably for the likes of power amps and electric screens. I am pretty sure from memory they were assignable too i.e it had twin HDMI outputs so if you switched HDMI 2 on for instance it would activate the trigger for the pj screen.Or maybe I am completely wrong, any experts able to clarify. It was a Yamaha RXV2067 (may have model number slightly wrong).
Edited by heisthegaffer on Wednesday 21st May 17:52
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff


