Roberts Blutune 100 tuning preset problem.
Discussion
Does anybody have one of these?
Just bought one for the kitchen and I'm dead chuffed with it especially how easy it is to use. Radio stations are found easily and the sound quality is spot on, however I can't save any of the channels to any of the 20 preset locations.
Followed the instructions and it isn't working in accordance to the guide, so is there a knack?
Just bought one for the kitchen and I'm dead chuffed with it especially how easy it is to use. Radio stations are found easily and the sound quality is spot on, however I can't save any of the channels to any of the 20 preset locations.
Followed the instructions and it isn't working in accordance to the guide, so is there a knack?
The Surveyor said:
Does anybody have one of these?
Just bought one for the kitchen and I'm dead chuffed with it especially how easy it is to use. Radio stations are found easily and the sound quality is spot on, however I can't save any of the channels to any of the 20 preset locations.
Followed the instructions and it isn't working in accordance to the guide, so is there a knack?
Just bought one for the kitchen and I'm dead chuffed with it especially how easy it is to use. Radio stations are found easily and the sound quality is spot on, however I can't save any of the channels to any of the 20 preset locations.
Followed the instructions and it isn't working in accordance to the guide, so is there a knack?
EDIT: Balls - this looks like one of the spam bumps where someone is going to post a "helpful" (spam) link.
I really should check the dates in more detail haha.
As you were...
According to the manual:
I really should check the dates in more detail haha.
As you were...
According to the manual:
manual said:
Presetting stations - DAB and FM
You may store your preferred DAB and FM radio stations to the preset
station memories. There are 20 memory presets in your radio, 10 for
DAB and 10 for FM. Presets are remembered by your radio in the event
of a power failure.
The procedure for setting presets and using them to tune stations is the
same for FM and DAB modes, and is described below.
1. Press and release the On / Standby button to switch on the sound
system.
2. Press the Mode button to select the desired waveband DAB or FM.
3. Tune to the required station as previously described.
4. Press and hold the Preset button. The display will show, for example,
'1: (Empty)' if no station has been stored to that preset.
5. Use the Tuning Up or Down buttons to select the desired preset
station number under which you wish to store the station.
6. Press and release the Preset button until the display shows, for
example, 'Preset 1 stored'. The station will be stored under the chosen
preset. Repeat this procedure for the remaining presets.
7. Stations which have been stored in preset memories may be overwritten
by following the above procedure.
You may store your preferred DAB and FM radio stations to the preset
station memories. There are 20 memory presets in your radio, 10 for
DAB and 10 for FM. Presets are remembered by your radio in the event
of a power failure.
The procedure for setting presets and using them to tune stations is the
same for FM and DAB modes, and is described below.
1. Press and release the On / Standby button to switch on the sound
system.
2. Press the Mode button to select the desired waveband DAB or FM.
3. Tune to the required station as previously described.
4. Press and hold the Preset button. The display will show, for example,
'1: (Empty)' if no station has been stored to that preset.
5. Use the Tuning Up or Down buttons to select the desired preset
station number under which you wish to store the station.
6. Press and release the Preset button until the display shows, for
example, 'Preset 1 stored'. The station will be stored under the chosen
preset. Repeat this procedure for the remaining presets.
7. Stations which have been stored in preset memories may be overwritten
by following the above procedure.
manual said:
Recalling a preset station
1. Press and release the On / Standby button to switch on the sound
system.
2. Press the Mode button to select the desired waveband DAB or FM.
3. Press and release the Preset button. The display will show, for example,
'1: (Empty)' if no station has been stored to that preset. If a preset has
been stored, then the display will show either the station name (for
DAB stations) or the frequency (for FM stations).
4. Press the Tuning Up or Down buttons to select the desired preset
station.
5. Press and release the Select button. Your radio will tune to the chosen
preset station stored in the preset memory.
If your radio doesn't work as per above then I suggest it has a fault.1. Press and release the On / Standby button to switch on the sound
system.
2. Press the Mode button to select the desired waveband DAB or FM.
3. Press and release the Preset button. The display will show, for example,
'1: (Empty)' if no station has been stored to that preset. If a preset has
been stored, then the display will show either the station name (for
DAB stations) or the frequency (for FM stations).
4. Press the Tuning Up or Down buttons to select the desired preset
station.
5. Press and release the Select button. Your radio will tune to the chosen
preset station stored in the preset memory.
Edited by TonyRPH on Thursday 29th December 08:56
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff