Advice on a decent tv for this space......
Discussion
Afternoon all,
I’m planning on a new tv to be hopefully flush wall mounted in the lounge.
Currently we have an empty chimney breast, with a 59” mirror mounted on it. (Pics below).

I am thinking substitute the mirror for either a 60” tv or a 65”. Distance from chimney breast to the tv will be 2.7m
I am hoping (in the idea world) that the enclosure can be simply cut out of the existing plaster board, the tv mount bolted to the back of the chimney breast and an access hole cut on the right side of the chimney breast with an enclosure built on that side to house all the gubbins.
Seems (too) simple to me, and if anyone can point out obvious flaws/cock ups I would be grateful.
Outside of that, anyone got suggestions on the ideal tv to fit the above spec?
Thanks all
CTO

I’m planning on a new tv to be hopefully flush wall mounted in the lounge.
Currently we have an empty chimney breast, with a 59” mirror mounted on it. (Pics below).

I am thinking substitute the mirror for either a 60” tv or a 65”. Distance from chimney breast to the tv will be 2.7m
I am hoping (in the idea world) that the enclosure can be simply cut out of the existing plaster board, the tv mount bolted to the back of the chimney breast and an access hole cut on the right side of the chimney breast with an enclosure built on that side to house all the gubbins.
Seems (too) simple to me, and if anyone can point out obvious flaws/cock ups I would be grateful.
Outside of that, anyone got suggestions on the ideal tv to fit the above spec?
Thanks all
CTO

Witha price range from £529 to £4999 some idea of budget would be a start. What are you going watch? Do you need the TV to access streaming services like Netflix, Prime etc? How bright is the room - an OLED might not be the best solution for a bright room.
https://www.richersounds.com/tv-projectors/all-tvs...
A fully inset screen might be difficult to achieve as you're going to have to frame the cutout & it's not easy to get an equal gap all the way round. I'd settle for insetting the mount & having the back of the TV on the plasterboard - most of them are only a few mm thick. Site the TV as low as you can as it's a right pain to be looking up that high.
https://www.richersounds.com/tv-projectors/all-tvs...
A fully inset screen might be difficult to achieve as you're going to have to frame the cutout & it's not easy to get an equal gap all the way round. I'd settle for insetting the mount & having the back of the TV on the plasterboard - most of them are only a few mm thick. Site the TV as low as you can as it's a right pain to be looking up that high.
CTO said:
CharlesElliott said:
Do you not think it will be far too high in that position?
I am covered it might be tbh. But lower would not be equidistant (give or take a few cm) and might look odd? thanks for the recommendation above btw 
Ok, so, taking into account comments re height. Here is a new plan.
A 55” is only slightly smaller than the mirror in width and depth so using that as rough size guide.
Drop the tv/mirror to the height of the top of the fireplace. Do away with the idea of a rack to the right hand side of the chimney breast, remove the fan heater in the fire alcove and have the alcove kitted out to house all the gubbins which then feed the tv above......
A 55” is only slightly smaller than the mirror in width and depth so using that as rough size guide.
Drop the tv/mirror to the height of the top of the fireplace. Do away with the idea of a rack to the right hand side of the chimney breast, remove the fan heater in the fire alcove and have the alcove kitted out to house all the gubbins which then feed the tv above......
TwigtheWonderkid said:
CTO said:
CharlesElliott said:
Do you not think it will be far too high in that position?
I am covered it might be tbh. But lower would not be equidistant (give or take a few cm) and might look odd? thanks for the recommendation above btw 
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff