projector help. . . ?

Author
Discussion

no-worries88

Original Poster:

1,817 posts

200 months

Tuesday 27th January 2009
quotequote all
Just wondering,if i got a projector and screen.what would i need,and how, would i be able to watch tv through it?cheers guys.

convert

3,747 posts

220 months

Tuesday 27th January 2009
quotequote all
A freeview box, connected via RCA cables would work (providing the projector has RCA inputs)

You might, however, want to connect the audio via a stereo / surround sound system.

cjs

10,805 posts

253 months

Tuesday 27th January 2009
quotequote all
There is a new Forum for Hifi and home cinema, you may get a better response on there.

If you are going to ceiling mount your projector you will need a bracket.

As for connections to the projector, they vary depending on brand. All have a Video input, usually a yellow Phono/RCA or better use component Video. Some now come with HDMI. You will need to send the signal from a video source, this could be a Sky box, Freeview box, DVD, etc. Best use an AV amp for sound and so you can switch sources.

Obviously you will need to get cables up to the projector, dont forget power.

no-worries88

Original Poster:

1,817 posts

200 months

Tuesday 27th January 2009
quotequote all
Cheers for your help guys.one final question.how far would the projector need to be from the screen?cheers

DavidY

4,459 posts

286 months

Tuesday 27th January 2009
quotequote all
Depends on the throw of the projector and the image size that you want, most projectors are different.

davidy

no-worries88

Original Poster:

1,817 posts

200 months

Tuesday 27th January 2009
quotequote all
Thanks mate.is 2.5m to 3m away going to get a decent enough size you think? Its for the littlens bedroom

no-worries88

Original Poster:

1,817 posts

200 months

Tuesday 27th January 2009
quotequote all
Thanks mate.is 2.5m to 3m away going to get a decent enough size you think? Its for the littlens bedroom

wonderingdervish

1 posts

185 months

Tuesday 27th January 2009
quotequote all
the best thing to do is to pick a projector and then use an image calculator with your distances to figure out your image size. I used these guys before and their specialists www.avitav.co.uk. They don't have the biggest range out there but they really know what they are talking about and only specialise on a few good projectors. I just gave them a call and they demonstrated a few projectors and gave me the exact image size at my distance. It's not the easiest thing to do hence why LCD plasmas are more popular. I got a Full HD projector for just over a 1k and never looked back. 100" image size with mind blowing quality.

good luck

cjs

10,805 posts

253 months

Tuesday 27th January 2009
quotequote all
A good benchmark is a ratio of between 1.8-2.3 times the screen width. This is a good average but all projectors vary. If its a kids bedroom I would not go too big, a 4'/5' screen will be plenty big enough.