Question about HD programmes..
Author
Discussion

minghis

Original Poster:

1,579 posts

282 months

Monday 16th July 2012
quotequote all

So, looking around what's available in HD and what's not on the planner I am stunned at the amount of old stuff that's being shown in HD yet relatively modern stuff isn't.

Example - some 1970's films are HD yet seemingly all Star Trek (up to and including Voyager) is not, in fact some of the picture quality of the (relatively) modern stuff is really bad.

Has HD always been 'available' and we're only noticing now that we've got it or has the older stuff been remastered and is called HD?

If someone could throw some light on this I'd be grateful.

davepoth

29,395 posts

230 months

Monday 16th July 2012
quotequote all
Anything filmed on...film can be rescanned. It's difficult to give an accurate number but a conventional print will likely yield acceptable scanning results at 2k or above. If it's shot with video then you are stuck with the original number of recorded lines, the data is just not there to go any better.

AlexS

1,595 posts

263 months

Tuesday 17th July 2012
quotequote all
Stuff like Star Trek TOS and the first couple of seasons of Star Trek TNG were done entirely to film. This was the original filming, the editing and the addition of the special affects. This means that there is a high quality master that can be transferred to HD.

On a lot of the newer stuff, Babylon 5 is a good example, the initial film was transferred to tape and then the editing and special affects carried out on this. Whilst this was quick, easy and kept the costs down is has left shows without a high quality broadcast master that can be transferred.

98elise

32,886 posts

192 months

Tuesday 17th July 2012
quotequote all
Film dosen't have a resolution, so you can "downgrade" it to HD smile


98elise

32,886 posts

192 months

Tuesday 17th July 2012
quotequote all
davepoth said:
Anything filmed on...film can be rescanned. It's difficult to give an accurate number but a conventional print will likely yield acceptable scanning results at 2k or above. If it's shot with video then you are stuck with the original number of recorded lines, the data is just not there to go any better.
I thought 4k was about right for films. been a few years since I looked into it though.