Matching Skirting Board
Author
Discussion

944fan

Original Poster:

4,962 posts

216 months

Wednesday 28th September 2011
quotequote all
Can someone please help me find some skirting board which matches (even a close match, not identitical will do) the picture below. I have looked everywhere.





It needs to be quite thick as well, at least 18mm.

GreenDog

2,261 posts

223 months

Wednesday 28th September 2011
quotequote all
There are places that will take your skirting and manufacture some for you. Have a ring round some timber suppliers, they may be able to help.

944fan

Original Poster:

4,962 posts

216 months

Wednesday 28th September 2011
quotequote all
Yeah I found one place who did that but they wanted £100 tooling fee on top of the cost per metre. Will try some others, maybe on ewill have a similar profile already tooled.

I though about molding my own as I have a 3.5Hp router and table but the molding bits are about £80 each yikes

Blakeatron

2,567 posts

204 months

Wednesday 28th September 2011
quotequote all
We do this a lot - as we have been going quite a while we have a big collection of cutters so can normally bodge most shapes to very close.

Cutters are £40 a set (inc vat), its the labour to muck around with it that costs.

Sounds daft but it took me 3 hours to make 2m of detailed skirting once!

ncs

3,974 posts

313 months

Wednesday 28th September 2011
quotequote all
Expect to pay at least £100 for setup & making of cutters, plus materials & running cost.

Otherwise, rip it all out & replace with new, which is often a cheaper option.

Nicknerd

944fan

Original Poster:

4,962 posts

216 months

Wednesday 28th September 2011
quotequote all
I have ripped the whole lot out. The door trim has the reeded element to it also and I don't want to start ripping all that out as well. Particualry as I will have to do all the other rooms to make it match.

Its annoying as I can't find anything remotley close. The skirting is original and the house was only built 14 years ago.

I don't want to pay for tooling as I only need a few metres and it just isn't worth it.

Blakeatron

2,567 posts

204 months

Wednesday 28th September 2011
quotequote all
Bit of a bodge but cant you steal a bit from an unseen area - behind a bed/sofa?

Wings

5,973 posts

246 months

Wednesday 28th September 2011
quotequote all
Howdens do a fair range of different MDF skirting.

TSS

1,137 posts

299 months

Wednesday 28th September 2011
quotequote all
There's a guy in Northampton who's done several lengths of skirting and complicated door surround for me. Exellent match every time. Very reasonable on price. Only downside is he has loads of work so no good if you need it in a hurry. PM me if you'd like his details.

CedGTV

2,538 posts

285 months

Thursday 29th September 2011
quotequote all
Closest I could get to that would be

http://mdfskirtingboard.co.uk/graphics/mdf_reeded_...

It's triple reeded in relief so could match your architrave profile.

That or it's down the local joiners and a bill to follow.

ExChrispy Porker

17,760 posts

259 months

Thursday 29th September 2011
quotequote all
Jewsons will cut skirting to match a profile. ( or at least they did ).It's dear, but not ridiculously so.

69 coupe

2,459 posts

242 months

Thursday 29th September 2011
quotequote all
Bit left-field, what about using some fibre glass matting, make a mould from fibre glass or poured plastered mould. A bit TVR'ish


Yep thought so too much work

ncs

3,974 posts

313 months

Thursday 29th September 2011
quotequote all
944fan said:
I don't want to pay for tooling as I only need a few metres and it just isn't worth it.
And it takes a long time to make the template, grind the cutters, set the machine etc etc...hence the high price for small quantities as the costs cant be absorbed as they are with larger volumes.

Its a problem we often have (see my profile).

Nicknerd

Deva Link

26,934 posts

276 months

Thursday 29th September 2011
quotequote all
944fan said:
The skirting is original and the house was only built 14 years ago.
Is the house a one-off? Even if it is, seems most unlikely they've have had skirting etc custom made, and even more unlikly for a bigger development.

944fan

Original Poster:

4,962 posts

216 months

Friday 30th September 2011
quotequote all
DevaLink- - The house isn't a one off but it has a unusalish history. The original builder went bust very early on in building the houses on the street. Another builder took over who were more used to building large luxury homes so the quality of materials used is very high. I suspect they may have had some skirting made for some of their other properties that may have been custom and had a lot left over and used on our houses. Who knows.


944fan

Original Poster:

4,962 posts

216 months

Saturday 1st October 2011
quotequote all
Thanks for all the suggestions. I went to a couple of timber merchants who have a moulding machine. Neither had any cutters to make that profile. One of them siad it was very unusual and would have to be custom made. In the end I found a single ogee board with a chamfered top edge. It is nothing like the original but it matches the rest of the trim reasonably well.