Engineered Wooden Flooring in Bathroom
Engineered Wooden Flooring in Bathroom
Author
Discussion

orbit123

Original Poster:

305 posts

223 months

Saturday 8th October 2011
quotequote all
We're thinking of putting a wooden floor in our fairly large family bathroom. It has a big walk in shower and a cast iron bath (which won't be used much) so I'm thinking there shouldn't be huge amounts of water on the floor.
It would be lacquered oak engineered flooring and I'm looking at a product that has a click system which should pull the joints tight. In addition I'd glue every joint with wood glue - the floor would otherwise be floating. In theory this should leave a fully sealed surface but I've read and seen a few horror stories with wood in wet areas.
Anyone any experience?

anonymous-user

85 months

Saturday 8th October 2011
quotequote all
Personally i'd be very nervous. When we had our wood floor installed the fitter told me that that you need to clean up any liquid spillages straight away. No matter how hard you try you will always get water on a bathroom floor and will everybody in your house be careful about cleaning it up? As well as the spillage issue, bathrooms are also very damp rooms (even if you have good ventilation.

The other issue is that I imagine that the wood the wood would become very slippery when wet.

Gingerbread Man

9,173 posts

244 months

Saturday 8th October 2011
quotequote all
Bamboo is meant to be better than wood. Doesn't absorb water so readily. Also generally cheaper.

E31Shrew

5,965 posts

223 months

Saturday 8th October 2011
quotequote all
We put solid oak down 5 years ago and to date no problems. I do oil it annually though

anonymous-user

85 months

Saturday 8th October 2011
quotequote all
E31Shrew said:
We put solid oak down 5 years ago and to date no problems. I do oil it annually though
I'd have thought solid wood would be better than engineered wood.

Marty63

2,347 posts

205 months

Saturday 8th October 2011
quotequote all
I put some cheaper grade laminate in our kitchen as i know it was going to get some use and abuse of thru traffic to rest of house,
however i applied four layers of industrial floor sealer and buffed it up,
this stuff seals and hardens, doing the job so far,
cant see why a good yacht varnish would not seal also
obviously not edges.

ncs

3,974 posts

313 months

Saturday 8th October 2011
quotequote all
Inkyfingers said:
I'd have thought solid wood would be better than engineered wood.
No it wouldnt, solid wood, particularly Oak, could be a nightmare in a bathroom, engineered is more stable but I wouldnt use either in a bathroom.

Its not just water on the floor you have to worry about, the moisture & condensation in a bathroom could give you serious problems.

I sell a lot of flooring every month (see link on my profile) & I wouldnt put it in my bathroom.

Nicknerd

944fan

4,962 posts

216 months

Saturday 8th October 2011
quotequote all
I think wood products should be avoided in wet rooms as wood does not like water. Engineered is better than solid but I would still avoid it.

The previous owner of my house fitted wood flooring everywhere downstairs, including the utility room. The washing machine leaked and the floor is buckled to hell now. It buckled so much that it started to lift the stud wall between this room and the kitchen and has created a 8mm gap the bottom of the wall - probably doesn't help that the bottom plate of the wall wasn't screwed down.

russ_a

4,728 posts

242 months

Saturday 8th October 2011
quotequote all
We have had trouble in our kitchen with our walnut floor. Have wood effect tiles in the bathroom, a bh to keep clean but look great.

Tony427

2,873 posts

264 months

Saturday 8th October 2011
quotequote all
Don't use engineered oak floors in a bathroom the water vapour and hmidity will cause major problems.

In the very recent years I have refitted four bathrooms and I used marine ply over the existing floor ( screwed down at 4 inch centres into the wooden floor) with either vinyl planks ( which do a great job in the bathroom environment) or the "floor in a box" from Tarkett which B&Q used to stock.

IMHO the Tarkett stuff is absolutely fantastic and knocks the standard planks into a hat for appearance, durability and adhesion. Put this stuff down and nothing will get it to come unstuck. Dead easy to lay as well. ( I only tried it cos it was cheaper on special offer than the planks).

hth

Cheers,

Tony




Sevo

297 posts

222 months

Sunday 9th October 2011
quotequote all
A related question, anyone have any thoughts on laminate/engineered wood in kitchens?

We're buying a new build and looking at flooring options, house builder offers Pergo but going to get an external quote too. This would be for entrance hall, downstairs loo, kitchen and utility. Would tiles be better? I much prefer the wood look.

Cheers.

ncs

3,974 posts

313 months

Sunday 9th October 2011
quotequote all
Shouldnt be a problem in a kitchen as the moisture level in the air is much lower than a bathroom, but go for an engineered board rather than solid as it tends to be more stable. (If a little more expensive).

One tip, if water gets spilt clean it up immediatly, & dont clean the floor with a wet mop, use the specialist cleaning kit & dry floor mop with wipes & all will be well.

Nicknerd

eliot

11,999 posts

285 months

Sunday 9th October 2011
quotequote all
Do you have young boys? They get up in the middle of the night and slash all over the floor. Bathroom ends up smelling like the gents down the local.
As for bambo - its complete garbage and best avoided for any purpose.

orbit123

Original Poster:

305 posts

223 months

Sunday 9th October 2011
quotequote all
thanks all. Doesn't sound like its worth the risk - back to looking at tiles I think. We'll maybe still for engineered wood in the kitchen though.

MagicalTrevor

6,481 posts

260 months

Sunday 9th October 2011
quotequote all
As this thread seems to have concluded may I just get everyone's attention and ask for a recommendation for brand and supplier of engineered oak flooring? It's to go in our hall. I don't want to spend too much but I also don't want rubbish.

I think I've seen Kahrs mentioned, is this a good option or am I paying too much?

orbit123

Original Poster:

305 posts

223 months

Sunday 9th October 2011
quotequote all
We've been looking at a brand called Elka for engineered oak. Mainly as they do a structural board that can go right onto the joists which is good for areas where we have underfloor heating. I've only got 1 pack as a sample but it does look very good. They do thinner boards that can be used as a floating floor.

Manks

28,176 posts

253 months

Monday 10th October 2011
quotequote all
ncs said:
No it wouldnt, solid wood, particularly Oak, could be a nightmare in a bathroom, engineered is more stable but I wouldnt use either in a bathroom.

Its not just water on the floor you have to worry about, the moisture & condensation in a bathroom could give you serious problems.

I sell a lot of flooring every month (see link on my profile) & I wouldnt put it in my bathroom.

Nicknerd
(Sory about the HJ chaps).

Nick

We have got to do a 16ft x 12ft lounge shortly. The remit is that is must look like Oak planks, resist our kids' attempts at destroying it with orange squash spills, our dog's claws, heavy furniture and it must look good.

It's going down on a screed floor.

Should we go solid oak, engineered, Karndean?
What would you recommend?


russ_a

4,728 posts

242 months

Monday 10th October 2011
quotequote all
Manks said:
(Sory about the HJ chaps).

Nick

We have got to do a 16ft x 12ft lounge shortly. The remit is that is must look like Oak planks, resist our kids' attempts at destroying it with orange squash spills, our dog's claws, heavy furniture and it must look good.

It's going down on a screed floor.

Should we go solid oak, engineered, Karndean?
What would you recommend?
We are having solid oiled oak, and have an active 4 year old and a dog!

Manks

28,176 posts

253 months

Monday 10th October 2011
quotequote all
russ_a said:
We are having solid oiled oak, and have an active 4 year old and a dog!
Bit concerned about having to re-oil it.

How much is it per m?

russ_a

4,728 posts

242 months

Monday 10th October 2011
quotequote all
£35 per sq meter - Our last birch floor went 4 years ish before a re-sand and oil.

Edit to say - With real wood expect it to get scratched and age (adds to the charm)



Edited by russ_a on Monday 10th October 12:46