Anyone recognise these kitchen cupboards? Still available?
Discussion
Hi,
Our house was built in 2003, so not too old, and I'm hoping the kitchen cupboard fronts are still available!
We have an area to the left of this photo with a small dining table in, and above it, I'd like to fit some new wall mounted cupboards, the same as pictured, for some extra storage.

I was hoping if someone here recognised it, it would save me from having to try lots of kitchen suppliers!
Thanks for any advice.
Dan
Our house was built in 2003, so not too old, and I'm hoping the kitchen cupboard fronts are still available!
We have an area to the left of this photo with a small dining table in, and above it, I'd like to fit some new wall mounted cupboards, the same as pictured, for some extra storage.
I was hoping if someone here recognised it, it would save me from having to try lots of kitchen suppliers!
Thanks for any advice.
Dan
Vee said:
What make is your hob (and other appliances) ? Diplomat ?
That looks like an old MFI one - presumably no codes on the back of the doors ?
Oven and hob are Neff. Couldn't see anything written on the doors, no. For what it's worth, the insides of the cupboards are also the same wood colour, not white. That looks like an old MFI one - presumably no codes on the back of the doors ?
Can't help with the manufacturers name, but if you want matching doors made I've used these people a few times and found them very good.
http://www.doors2size.co.uk
Give them a call and they'll tell you to either come in with a door, (they're in Huntingdon if you're close), or they'll work off good e-mail photos. I'm sure they'll be able to match the door.
And no I don't work for them, just a very satisfied five time customer
http://www.doors2size.co.uk
Give them a call and they'll tell you to either come in with a door, (they're in Huntingdon if you're close), or they'll work off good e-mail photos. I'm sure they'll be able to match the door.
And no I don't work for them, just a very satisfied five time customer
insideline said:
Same as a kitchen we have just ripped out of our house in readiness for a new one. Ours was a Miller Homes fitted kitchen house built 2004 made by Symphony Kitchens.
You have the same kettle as me as well!
Good shout! Looks just like this one:You have the same kettle as me as well!
http://www.gallery-kitchens.co.uk/ranges/shaker/ge...
danyeates said:
If it's Symphony, you can get extra doors from them but be prepared to have your pants pulled down. I bought a door for integrated dishwasher and washing machine, was about £450 for the pair. miniman said:
danyeates said:
If it's Symphony, you can get extra doors from them but be prepared to have your pants pulled down. I bought a door for integrated dishwasher and washing machine, was about £450 for the pair. hungry horace said:
if i can help, i will = what's the width of the rails / stiles?
that looks like one of our cherry ranges, as supplied to many homebuilders / developers / kitchen retaillers...
Thanks. Can you elaborate please? What's the rails/stiles?that looks like one of our cherry ranges, as supplied to many homebuilders / developers / kitchen retaillers...
Here are a few more photos (please excuse the mess, we've just moved in and not found a home for everything yet!)
This is where I'd like them to go, above the little table. I'm thinking a corner cupboard in the middle and one cupboard either side. Possibly small triangular shelves on each end for herbs and spices.
New fridge is needed!
ok - in common with shaker door ranges, there are 5 components; 2pcs stiles (up and down), 2pcs rails (left-to-right), and an infill / centre panel.
overall dimensions of doors are quite common within +/-2mm in keeping with carcase standards.
but the fascia widths of the stiles / rails will vary depending on manufacturers aesthetics /capabilities.
let me know how wide these parts are on this range - as above, it may be one of ours. i am on a laptop at present and as such the colours are a bit distorted, it does look like a cherry kitchen to me though.
overall dimensions of doors are quite common within +/-2mm in keeping with carcase standards.
but the fascia widths of the stiles / rails will vary depending on manufacturers aesthetics /capabilities.
let me know how wide these parts are on this range - as above, it may be one of ours. i am on a laptop at present and as such the colours are a bit distorted, it does look like a cherry kitchen to me though.
hungry horace said:
ok - in common with shaker door ranges, there are 5 components; 2pcs stiles (up and down), 2pcs rails (left-to-right), and an infill / centre panel.
overall dimensions of doors are quite common within +/-2mm in keeping with carcase standards.
but the fascia widths of the stiles / rails will vary depending on manufacturers aesthetics /capabilities.
let me know how wide these parts are on this range - as above, it may be one of ours. i am on a laptop at present and as such the colours are a bit distorted, it does look like a cherry kitchen to me though.
Ok, thanks. I will measure up tonight. Will take a photo with my D-SLR with the white balance correctly set up so it should be an accurate representation of the colour. overall dimensions of doors are quite common within +/-2mm in keeping with carcase standards.
but the fascia widths of the stiles / rails will vary depending on manufacturers aesthetics /capabilities.
let me know how wide these parts are on this range - as above, it may be one of ours. i am on a laptop at present and as such the colours are a bit distorted, it does look like a cherry kitchen to me though.
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff




