Decent screwdrivers
Author
Discussion

Sump

Original Poster:

5,512 posts

198 months

Thursday 4th April 2013
quotequote all
All my screwdrivers are cheap and utter crap with mangled heads.

I need to buy some decent ones now.

I've spotted these 2 sets.

http://www.amazon.co.uk/Draper-28748-Screwdriver-S...

http://www.halfords.com/webapp/wcs/stores/servlet/...

I'm not a professional user, just a semi frequent diyer.

b2hbm

1,301 posts

253 months

Thursday 4th April 2013
quotequote all
I've got the Halfords set and they're very good quality at that price.

For car use they're fine, the only snag I find is that they're missing the larger sizes which you might find you need for DIY, especially if you're having to remove old conventional headed large wood screws. But for most jobs and use on a car, they're fine.

Brian

xstian

2,247 posts

177 months

Thursday 4th April 2013
quotequote all
If I had to go for one I would go for the Halford one's. That Draper kit has way too much stuff for the money.

In all honestly though both set's are not going to be great.

A quick look on amazon, came up with this.

http://www.amazon.co.uk/Teng-TT917Mega-Screwdriver...

It's only a few quid more and will be much better quality than the other two. If you don't like Teng there are loads of decent brand sets for not much more than the Hafords and Draper sets.

voicey

2,494 posts

218 months

Thursday 4th April 2013
quotequote all
I've been using those Halfords screwdrivers all weekend with no trouble.

Globs

13,847 posts

262 months

Thursday 4th April 2013
quotequote all
IMO most draper stuff is cheap chinese.
Look at Stanley FatMax kit etc. Usually if you buy expensive german stuff it's good, bear in mind that the price often reflects the quality.

Sump

Original Poster:

5,512 posts

198 months

rsv gone!

11,288 posts

272 months

Thursday 4th April 2013
quotequote all
Buy one Wera screwdriver. I bet you will soon be buying more.

Joe M

872 posts

276 months

Thursday 4th April 2013
quotequote all
Ive had that halfords set for years and there fine. For DIY you would want to add a few Philip screwdrivers as well, its Pozidrive with the Halfords set.

Sump

Original Poster:

5,512 posts

198 months

Thursday 4th April 2013
quotequote all

Muncher

12,235 posts

280 months

Thursday 4th April 2013
quotequote all
Wera impact driver bits are as tough as I have seen anywhere, almost indestructable so their screwdrivers must be pretty good.

fergus

6,430 posts

306 months

Thursday 4th April 2013
quotequote all
+1

Wera

anonymous-user

85 months

Thursday 4th April 2013
quotequote all
wera for my medium to heavy diy use. they have nice handles and th pozi drive tips stand up to abuse. if money no object it would be facom or beta

make sure you get the right ones for intended application. i have one set for general use, one set for electrics and another for car stuff

B17NNS

18,506 posts

278 months

Thursday 4th April 2013
quotequote all

Craikeybaby

12,174 posts

256 months

Thursday 4th April 2013
quotequote all
xstian said:
If I had to go for one I would go for the Halford one's. That Draper kit has way too much stuff for the money.

In all honestly though both set's are not going to be great.

A quick look on amazon, came up with this.

http://www.amazon.co.uk/Teng-TT917Mega-Screwdriver...

It's only a few quid more and will be much better quality than the other two. If you don't like Teng there are loads of decent brand sets for not much more than the Hafords and Draper sets.
I've had that set for 8 years now, and am pretty pleased with them, mainly with car use, but also recently DIY. The only two problems are that they have lost their magnetism and they have mangled some cheap screws before as the screwdrivers seem a lot stronger than the screws.

markbigears

2,485 posts

300 months

Thursday 4th April 2013
quotequote all
I got a nice set of Teng off ebay last year, very impressed with them

xstian

2,247 posts

177 months

Thursday 4th April 2013
quotequote all
xstian said:
If I had to go for one I would go for the Halford one's. That Draper kit has way too much stuff for the money.

In all honestly though both set's are not going to be great.

A quick look on amazon, came up with this.

http://www.amazon.co.uk/Teng-TT917Mega-Screwdriver...

It's only a few quid more and will be much better quality than the other two. If you don't like Teng there are loads of decent brand sets for not much more than the Hafords and Draper sets.
You missed out on this deal. When I put this link on this morning they where priced at £29.

Fort Jefferson

8,237 posts

253 months

pad58

12,549 posts

212 months

Thursday 4th April 2013
quotequote all
I had some JCB screw driver set as a present...hang on i'll google for pic.

These are good.

Edited by pad58 on Thursday 4th April 18:00

smifffymoto

5,186 posts

236 months

Thursday 4th April 2013
quotequote all
Facom........

sjj84

2,396 posts

250 months

Thursday 4th April 2013
quotequote all
I'm an industrial electrician so use screwdrivers heavily day in day out, my choice is wera. Screwfix is a good a place as any and often has them on offer. They do various different sets for different purposes, red handled electrical ones, green handled general ones, yellow handled ones that are designed to be hit with hammers and light blue which are stainless steel.