Garage roof price...
Author
Discussion

msduk

Original Poster:

86 posts

235 months

Saturday 17th August 2013
quotequote all
Hi does anyone have an idea for a reasonable ballpark to fix a flat garage roof? It needs new boards and recovering. 5m x 2.5m internal Cheers

msduk

Original Poster:

86 posts

235 months

Tuesday 20th August 2013
quotequote all
bump...

littleredrooster

6,417 posts

227 months

Tuesday 20th August 2013
quotequote all
Dunno, but get a quote from Hi-Tech roofing in Lincolnshire before committing to the job. They do glassfibre roof coverings and did an absolutely superb job on our extension a few years ago; slightly more expensive than felt, but 50 year guarantee and a far better job.

VxDuncan

2,850 posts

265 months

Tuesday 20th August 2013
quotequote all
msduk said:
Hi does anyone have an idea for a reasonable ballpark to fix a flat garage roof? It needs new boards and recovering. 5m x 2.5m internal Cheers
DIY with EPDM is about £300-400 materials. Pros and cons to all the coverings though. Would only go the glassfibre route if you're certain the building won't move, as unlike felt or epdm it won't flex, but crack.

kambites

71,703 posts

252 months

Wednesday 21st August 2013
quotequote all
VxDuncan said:
Pros and cons to all the coverings though. Would only go the glassfibre route if you're certain the building won't move, as unlike felt or epdm it won't flex, but crack.
Lead does everything pretty well... not cheap though. hehe

rallycross

13,763 posts

268 months

Wednesday 21st August 2013
quotequote all
VxDuncan said:
msduk said:
Hi does anyone have an idea for a reasonable ballpark to fix a flat garage roof? It needs new boards and recovering. 5m x 2.5m internal Cheers
DIY with EPDM is about £300-400 materials. Pros and cons to all the coverings though. Would only go the glassfibre route if you're certain the building won't move, as unlike felt or epdm it won't flex, but crack.
Similar question for my garage, it has an asbesdos roof and I just want to waterproof the roof for a year or so until it gets knocked down and replaced - what is the best temporary fix? Can you put plastic sheets over the top with same sized corrugated grooves?

It's a 60's corrugated roof with a couple of leaks in heavy rain/ snow resulting in drips and wet floor

tbc

3,017 posts

206 months

Wednesday 21st August 2013
quotequote all
i know somewhere there's asbestos sheeting going cheap?

rofl

Vince70

1,944 posts

225 months

Wednesday 21st August 2013
quotequote all
rallycross said:
Similar question for my garage, it has an asbesdos roof and I just want to waterproof the roof for a year or so until it gets knocked down and replaced - what is the best temporary fix? Can you put plastic sheets over the top with same sized corrugated grooves?

It's a 60's corrugated roof with a couple of leaks in heavy rain/ snow resulting in drips and wet floor
I've the same problem as yourself and I only want to bodge the roof till next year,
You will need something like this to put over the joints of the the asbestos sheeting,
http://www.amazon.co.uk/Ronseal-HPRS1L-Thompsons-H...

to do a proper job I think it should cost in the region on £800 for someone to fix as it will need boarding and felt and if as rotten as mine new joists.

DoubleSix

12,572 posts

207 months

Wednesday 21st August 2013
quotequote all
Right, forget that Ronseal rubbish and all the rubber based stuff too.

The only product worth looking at for this type of job is Acrypol +, I used it on my garage roof after recommended by a roofer. Had to get it from a commercial supplier but it is one of those wonder products that you are very glad you discovered. The fibres will swallow up gaps up to a couple of centermetres, wider gaps just need a webbing first.

Did my roof in a day.

DangerMonkey

590 posts

247 months

Wednesday 21st August 2013
quotequote all
As an alternative I had this put on mine over a layer of marine ply. So long as it doesn't get punctured it should last forever. Price was very comparable to the felt quotes I got at the time.

http://www.firestonerubbercover.com/en/home.aspx

shimmey69

1,525 posts

209 months

Wednesday 21st August 2013
quotequote all
rallycross said:
Similar question for my garage, it has an asbesdos roof and I just want to waterproof the roof for a year or so until it gets knocked down and replaced - what is the best temporary fix? Can you put plastic sheets over the top with same sized corrugated grooves?

It's a 60's corrugated roof with a couple of leaks in heavy rain/ snow resulting in drips and wet floor
plastic corrugated stuff is expensive!!

cheap options are tarps or damp proof membrane put over the top, battened around the edges and some weight on top, will keep the worst out and see you through to next year, cheaply!

msduk

Original Poster:

86 posts

235 months

Thursday 22nd August 2013
quotequote all
I think I might try the Acropol route. Garage roofs are a very un-sexy purchase. Cheers

roofer

5,136 posts

242 months

Thursday 22nd August 2013
quotequote all
msduk said:
I think I might try the Acropol route. Garage roofs are a very un-sexy purchase. Cheers
Cromopol, not Acropol.

DoubleSix

12,572 posts

207 months

Thursday 22nd August 2013
quotequote all
roofer said:
msduk said:
I think I might try the Acropol route. Garage roofs are a very un-sexy purchase. Cheers
Cromopol, not Acropol.
Same thing different brand surely

roofer

5,136 posts

242 months

Thursday 22nd August 2013
quotequote all
DoubleSix said:
roofer said:
msduk said:
I think I might try the Acropol route. Garage roofs are a very un-sexy purchase. Cheers
Cromopol, not Acropol.
Same thing different brand surely
No, Acropol requires a separate fleece, Cromopol has fibre structure already in it.

DoubleSix

12,572 posts

207 months

Thursday 22nd August 2013
quotequote all
roofer said:
DoubleSix said:
roofer said:
msduk said:
I think I might try the Acropol route. Garage roofs are a very un-sexy purchase. Cheers
Cromopol, not Acropol.
Same thing different brand surely
No, Acropol requires a separate fleece, Cromopol has fibre structure already in it.
Nope. Acrypol+ has the fibres... as I mentioned above.

Theres loads of brands; flexicryl etc. its all the same stuff