Telivision security monitor required !!

[stesrg]

Ok years ago you could set a camera up and when someone trips the motion detector this would flash up on your TV in a little box so you could see who it is !

I cannot find anything like this now , all I want is a kit so I can put 2 cameras outside my property so when they activate they pop up on the TV SIMPLES !!

I did not want to go down the Ethernet route with separate monitor, I think if you are watching the TV and someone trips the sensor you can instantly see who is their :-)

Has anyone seen anything like this your thought will be most welcome

[stesrg]

No thoughts on this then ?

[GC8]

This worked cheaply due to SCART. When the PIR turned on the camera feed your television will have automatically turned over to the AV channel.

Move away from the old tech and it wont be cheap or simple.

[The Moose]

That would drive me around the bend personally!

[eliot]

Few seconds in google for 'cctv scart adapter pir' gives:

http://www.westcountryalarms.com/productsinfo.php?...

I wouldn't trust the quality of that camera though as they dont list the specs. You want 1/3" CCD not cheapo 1/4" cmos.

Any single camera will plug directly into a telly via the a scart connector (cameras and scart use composite video)

I personally have a multicamera DVR and run the composite output into a UHF modulator, which goes into aerial socket onto sky box, which then goes out into a splitter and feeds all the tellys round the house.

[Gareth79]

Do modern TVs do SCART switching though? It might be more useful to have a discreet chime box or something so that you can decide to switch to the SCART input if you need to.

[DSLiverpool]

Google gjd external pirs and couple with wifi cameras for a good alternative
The gjd system is impressive