Weighing in copper
Author
Discussion

Nickyboy

Original Poster:

6,826 posts

265 months

Sunday 31st May 2015
quotequote all
Left over form my bathroom refit i have loads of copper pipe, some nice and clean and some heavily painted.

I know i need to remove the solder joints but what about those pieces that have a few layers of paint on, is it a case of taking a wire brush to them to clean them up? What is classed as clean copper? Is it actually worth cleaning it up? Also found about 20m worth of 15 & 22mm pipe in the loft left from when the heating was installed and old gas cooker removed, obviously was worth sod all 10 years ago

Anyone know the current prices for clean pipe etc?

Ekona

1,685 posts

233 months

Sunday 31st May 2015
quotequote all
We leave everything on, paint and soldered joints too, just take them to the scrappy and get your cash card in return. smile

john2443

6,553 posts

242 months

Sunday 31st May 2015
quotequote all
Unlikely to make enough difference in price for it to be worth you spending time cleaning it.

Remember that you (should if the scrappy are doing their job right) need to take ID with you.

GadgeS3C

4,727 posts

195 months

Sunday 31st May 2015
quotequote all
Weighed in a hot water cylinder a couple of weeks ago. Got about £3 a kg.

Nickyboy

Original Poster:

6,826 posts

265 months

Sunday 31st May 2015
quotequote all
Cheers, after a bit of research it seems for the amount i'll have the difference in the 2 types would be pennies.

dirkgently

2,160 posts

262 months

Monday 1st June 2015
quotequote all
Nickyboy said:
Cheers, after a bit of research it seems for the amount i'll have the difference in the 2 types would be pennies.
Last time I weighed some in the difference was nearly a quid per Kg.