Consumer Unit advice
Discussion
My CU needs changing and I'm trying to work out which to go with and what order (I won't be changing it myself) Could someone have a quick look at this and advise of any changes they would make
Rcd1, down lights, up sockets, cooker
Rcd2, up lights, down sockets, kitchen/diner lights
RCBO's, utility room, smoke alarms, c/heating, alarm, loft supply
After a quick look online I'm leaning towards a 15way Wylex board unless there is anything better at a similar price range
Cheers
Rcd1, down lights, up sockets, cooker
Rcd2, up lights, down sockets, kitchen/diner lights
RCBO's, utility room, smoke alarms, c/heating, alarm, loft supply
After a quick look online I'm leaning towards a 15way Wylex board unless there is anything better at a similar price range
Cheers
if yr not re-wiring beyond the board, its kind of irrelevant.
why ? well it depends on how much cable is behind the board to swap the existing position of things. I think you'll find it'll be marked up as the wires fit, rather than placing them so they read logically or nicely. But I know what you mean !
why ? well it depends on how much cable is behind the board to swap the existing position of things. I think you'll find it'll be marked up as the wires fit, rather than placing them so they read logically or nicely. But I know what you mean !
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff