Car Turntables
Author
Discussion

AB

Original Poster:

20,673 posts

226 months

Friday 11th March 2022
quotequote all
Costing up a car turntable at the moment which will follow some extension work on the garage including moving where the current door is. Has anyone done this and if so, is it possible to retain the current look i.e. cutting out the area and putting it back on top of the turntable?

So many options look awful and I'd prefer it to be as discrete as possible.



This is the driveway.

This looks awful;



This slightly better but still obvious.



I appreciate I'd never be able to totally hide it but what I'm after is it not ruining the driveway.

Any ideas or recommendations?

Thanks.

sherman

15,342 posts

246 months

Friday 11th March 2022
quotequote all
Resin or tarmac driveway. You need a surface that wont be changed whatever the rotation. That will be best to hide the turntable.

normalbloke

9,006 posts

250 months

Friday 11th March 2022
quotequote all
Is it that much of a ballache to reverse in? Once you start doing it, it should be second nature, or are there other considerations?

Don1

16,881 posts

239 months

Friday 11th March 2022
quotequote all
Naturally, the higher weight of the turn table, the more costly it will be.

Price for digging down, small foundations, frame, motors, power source to run motors and levelling to make it 'invisible' - before you put the turntable etc on.

As a solution, they are bloody brilliant. As long as they are flat....

AB

Original Poster:

20,673 posts

226 months

Friday 11th March 2022
quotequote all
normalbloke said:
Is it that much of a ballache to reverse in? Once you start doing it, it should be second nature, or are there other considerations?
Yes, the 90 degree turn at the bottom into the garage when the door is relocated.

To be honest it would be a bit of a ball ache turning in the road to reverse in too, the one major flaw with the property.

Carlososos

976 posts

127 months

Friday 11th March 2022
quotequote all
AB said:
Costing up a car turntable at the moment which will follow some extension work on the garage including moving where the current door is. Has anyone done this and if so, is it possible to retain the current look i.e. cutting out the area and putting it back on top of the turntable?

So many options look awful and I'd prefer it to be as discrete as possible.



This is the driveway.

This looks awful;



This slightly better but still obvious.



I appreciate I'd never be able to totally hide it but what I'm after is it not ruining the driveway.

Any ideas or recommendations?

Thanks.
I don’t have driveway that needs one but I want one now all the same. That’s going on the list as well as a 2 post lift!


joshleb

1,551 posts

175 months

Friday 11th March 2022
quotequote all
You don't have any utilities that enter the house through there do you?

Might need them relocating if so.


CloudStuff

4,271 posts

135 months

Friday 11th March 2022
quotequote all
If you do get one, stay humbel.

Henson

206 posts

76 months

Friday 11th March 2022
quotequote all
What you need is a square plinth for your car (not a round one) that not only rotates, but also raises up by 12 inches when it's time to do the rotating.
Then, 'tile' the top of it with your existing slabs so that it completely matches all the other slabs and joins, when looking towards the house.

Sequence of operation...

Park on it when you get home.
When leaving the drive, press a button. Platform raises and then rotates 180 degrees.
Platform lowers (all the slab joins now don't align, but fear not!)
You drive off and press a button when you are clear of the platform.
Platform raises, spins 180 degrees and drops back into 'Home' position.
All the slabs and joins now line back up and your drive looks great.

I bet no-one makes one like this. Shame, it seems a good idea (in my head) especially if you could get the 'Thunderbirds are Go!' music playing on loudspeakers dotted along your drive, to accompany the movement of the platform.

CharlesElliott

2,266 posts

313 months

Friday 11th March 2022
quotequote all
Ideas here: https://www.carturntables.co.uk/finishes-and-optio...

Resin and tarmac are the most subtle.

Dr Mike Oxgreen

4,473 posts

196 months

Friday 11th March 2022
quotequote all
A rotating turntable is all well and good, but I don't think your plans are ambitious enough.

Firstly, your garage should be concealed within a rock face.

And part of the driveway needs to be mounted on hydraulic rams to make it tilt upwards at a 30 degree angle. A small rising blast shield would be a distinct advantage too.

And those trees either side of the driveway - could they be made to tilt outwards at a 45 degree angle on command?

Something like this...

https://youtu.be/fEDcZBGZtrs

2 GKC

2,324 posts

136 months

Friday 11th March 2022
quotequote all
CloudStuff said:
If you do get one, stay humbel.
TH, is that really you? smile

normalbloke

9,006 posts

250 months

AB

Original Poster:

20,673 posts

226 months

Friday 11th March 2022
quotequote all
CharlesElliott said:
Ideas here: https://www.carturntables.co.uk/finishes-and-optio...

Resin and tarmac are the most subtle.
It's York stone, I guess I need to speak to a few companies and see what they say.

Not sure on services, I don't think so but again need to think about that when the time comes.

I'm not sure the budget extends to tilting trees and hydraulic garage etc but I'll stick a waterproof bluetooth speaker somewhere near to play Thunderbirds.

wong

1,449 posts

247 months

Friday 11th March 2022
quotequote all
Alternatively, change your car - to a BMW with reversing assistant.

https://www.carmagazine.co.uk/car-news/tech/bmw-re...

AB

Original Poster:

20,673 posts

226 months

Friday 11th March 2022
quotequote all
wong said:
Alternatively, change your car - to a BMW with reversing assistant.

https://www.carmagazine.co.uk/car-news/tech/bmw-re...
Nope nope nope

CloudStuff

4,271 posts

135 months

Friday 11th March 2022
quotequote all
2 GKC said:
CloudStuff said:
If you do get one, stay humbel.
TH, is that really you? smile
;-)

Chrisgr31

14,299 posts

286 months

Friday 11th March 2022
quotequote all
There is one here https://www.google.com/maps/@51.0502576,0.2294143,... As someone said looks better with resin

andyxxx

1,423 posts

258 months

Saturday 12th March 2022
quotequote all
Assuming it can be set to rotate exactly 90/180 degrees I think it would look ok inset with the same stone.

Alternatively set it with stone cut circularly so it doesn’t need to match up, perhaps in a contrasting stone?


jet_noise

6,109 posts

213 months

Saturday 12th March 2022
quotequote all
andyxxx said:
Assuming it can be set to rotate exactly 90/180 degrees I think it would look ok inset with the same stone.

Alternatively set it with stone cut circularly so it doesn’t need to match up, perhaps in a contrasting stone?

A spiral a la Time Tunnel (one for the younger readers) or jet engine intake perhaps.