Workbench build question
Author
Discussion

skeeterm5

Original Poster:

4,619 posts

219 months

Sunday 16th March 2025
quotequote all
Hi all

I am finally going to build a workbench to go in one of our barns, something like this

https://youtu.be/O16pe3NiUaU?si=WtDznWARrucrE_kg



There are lots on YouTube but I can’t seem to find the answer to my question about dimensions. In the video he builds it 1.8m long (because it is the wood he has), my question is could I build it 2,4m without adding a central leg?

The legs will be 4*4
The framing and any noggins 4*2
The top will be 18mm ply
Back and sides 11mm OSB

Thanks.

Simpo Two

93,116 posts

296 months

Sunday 16th March 2025
quotequote all
It depends how much you want to batter it. I built a bench 6' long that has two legs, but they're set in about 9" from each end. The top is made from 9" x 2" planks running left/right with hardboard on top and oak edging. Very solid

Zio Di Roma

4,202 posts

63 months

Sunday 16th March 2025
quotequote all
skeeterm5 said:
Hi all

I am finally going to build a workbench to go in one of our barns, something like this

https://youtu.be/O16pe3NiUaU?si=WtDznWARrucrE_kg



There are lots on YouTube but I can’t seem to find the answer to my question about dimensions. In the video he builds it 1.8m long (because it is the wood he has), my question is could I build it 2,4m without adding a central leg?

The legs will be 4*4
The framing and any noggins 4*2
The top will be 18mm ply
Back and sides 11mm OSB

Thanks.
I've built a few, of different sizes.

It will depend on a number of factors, including whether you're going to fix it to the wall and floor (I usually do) and how you're strengthening it internally / at the rear.

Tip: If you're building a wood workbench, fit angle bar along the front edge. It not only makes it more robust it gives you a hard edge to work against when you want it.