Best way to free this stopcock?
Best way to free this stopcock?
Author
Discussion

Scarletpimpofnel

Original Poster:

1,504 posts

49 months

Monday 31st March 2025
quotequote all
This stopcock seems corroded open. I'd like it to be able to be used if necessary but don't want to force it (seems jammed rock solid!)

Is there any stuff I could use that is likely to free it ?

Many thanks


tgr

1,256 posts

202 months

Monday 31st March 2025
quotequote all
That will give you no end of trouble if you ever want to use it. Give up and stick a new one on the same circuit

Road2Ruin

6,565 posts

247 months

Monday 31st March 2025
quotequote all
If you touch it, it will leak. Best thing to do is replace it.

OutInTheShed

14,951 posts

57 months

Monday 31st March 2025
quotequote all
If you are mega lucky, the whole working part will unscrew from the body and be replaced by a new one.

Simpo Two

93,100 posts

296 months

Monday 31st March 2025
quotequote all
They always fail; I don't know why people fit them. I would replace it with a lever ball valve - infinitely better.

Andeh1

7,623 posts

237 months

Monday 31st March 2025
quotequote all
That's got headache all over it! 30% force it and you're fine, 30% force it but you get a leak from one of the joints, 40% you force it and something shears off.


Have you an external meter to shut off the water to the house? This is a plumber type job in my book.


OutInTheShed

14,951 posts

57 months

Monday 31st March 2025
quotequote all
Simpo Two said:
They always fail; I don't know why people fit them. I would replace it with a lever ball valve - infinitely better.
A traditonal stopcock shuts off more positively.

Personally, I've seen more leaks from ball valves.

Wacky Racer

41,415 posts

278 months

Monday 31st March 2025
quotequote all
OutInTheShed said:
If you are mega lucky, the whole working part will unscrew from the body and be replaced by a new one.
This.

Turn the water off at the mains and unscrew and fit a complete new fitting with a new washer, There will be a small amount of spillage, so try and catch as much as possible,

Scarletpimpofnel

Original Poster:

1,504 posts

49 months

Monday 31st March 2025
quotequote all
Thanks all. I’ll see if I can find the external stop cock then get a plumber in.
Best to sort it before it’s needed.

CoolHands

23,717 posts

226 months

Monday 31st March 2025
quotequote all
I don’t know what these things are for. They never work when you need them

TriumphStag3.0V8

5,571 posts

112 months

Monday 31st March 2025
quotequote all
Wacky Racer said:
OutInTheShed said:
If you are mega lucky, the whole working part will unscrew from the body and be replaced by a new one.
This.

Turn the water off at the mains and unscrew and fit a complete new fitting with a new washer, There will be a small amount of spillage, so try and catch as much as possible,
If you do that, use a hose pipe on the drain valve on the left to let the water out from the house side of the system before removing the body - will be much cleaner!

Scarletpimpofnel

Original Poster:

1,504 posts

49 months

Monday 31st March 2025
quotequote all
TriumphStag3.0V8 said:
If you do that, use a hose pipe on the drain valve on the left to let the water out from the house side of the system before removing the body - will be much cleaner!
Good tip. Ty

Digger

17,070 posts

222 months

Monday 31st March 2025
quotequote all
What is the white? Is that calcium deposit from corrosion, damp & minor leakage?

blueg33

46,984 posts

255 months

Tuesday 1st April 2025
quotequote all
I’ve always wondered why we persist in using stopcocks like this , they always seize.

In my houses I add a SureStop so the water can be turned off at the push of a button.

SKM1984

218 posts

180 months

Tuesday 1st April 2025
quotequote all
blueg33 said:
I’ve always wondered why we persist in using stopcocks like this , they always seize.

In my houses I add a SureStop so the water can be turned off at the push of a button.
Which I have just had replaced with a traditional stopcock due to not working, the o ring in the plunger behind the switch jammed and broke the plastic channel behind the switch, when I needed it most it let me down!

Sheepshanks

41,378 posts

150 months

Tuesday 1st April 2025
quotequote all
Simpo Two said:
They always fail; I don't know why people fit them. I would replace it with a lever ball valve - infinitely better.
Doesn’t a traditional stop-cock incorporate back flow prevention?

M138

1,324 posts

22 months

Tuesday 1st April 2025
quotequote all
To give yourself any chance if you’ve got a functional stop cock that’s not seized it might be useful to back it off by half a turn from maxed out. Should the inevitable happen it might help that you might be able to try and turn it in both directions, WITH CARE.

Scarletpimpofnel

Original Poster:

1,504 posts

49 months

Tuesday 1st April 2025
quotequote all
OutInTheShed said:
If you are mega lucky, the whole working part will unscrew from the body and be replaced by a new one.
Hadn't thought of that as an option thanks.

Tymb

244 posts

126 months

Tuesday 1st April 2025
quotequote all
The white looks like calcium where it has dribbled over the years.
The nut above that looks like the nut for a packing gland, under/above that nut there is probably a leather washer. You tighten the nut and it squashes the washer sealing everything. When new the leather soaks up a like water and expands. The nut looks all the way tightened so the washer is probably shot. You could try loosening this and then try turning the handle, when they get old you end up tightening them right up to seal and it stops the handle turning.

If you're lucky, as above, you might be able to unscrew the guts and replace the rubber ring on the bottom and the packing gland. With a new gland the packing nut does not have to be really tight, do it up, turn water on, come back a bit later, if a bit of a drip just nip it up slightly more. The more you tighten the nut the stiffer the handle will be.

Simpo Two

93,100 posts

296 months

Tuesday 1st April 2025
quotequote all
Tymb said:
The white looks like calcium where it has dribbled over the years.
Maybe calcium hydroxide but not pure calcium.... https://www.youtube.com/watch?v=iDhl1jHncDc