Sourcing a part... PITA

[Jambur]

Hi guys,
I have an Ideal Logic C30 combi boiler. I'm going to be changing the thermostat controlling it soon, I currently use a Nest gen 2 controlling the relay, but Google in their wisdom are removing smart functionality for these in October.

I intend to use an opentherm controller (Tado). My boiler appears to have the correct harness, but doesn't have the plug to connect to the opentherm/weather compensation connection.

I've attached a picture of the connector. The complicating factor is that I'm in Ireland, the few UK sources I've found wont ship here. To my eyes it looks like a fairly generic 4 wire molex, but I cant find a generic type either.

https://idealcommercialboilers.com/uploads/documen...



Any advice/pointers in the right direction would be greatly appreciated.

Edited by Jambur on Sunday 27th April 15:06

[CharlesElliott]

Lumberg Rast 3611 connector? Farnell sell them, and I assume Farnell supply to Ireland?

[Jambur]

CharlesElliott said:

Lumberg Rast 3611 connector? Farnell sell them, and I assume Farnell supply to Ireland?

You beautiful man

Thank you!

[CoolHands]

Pictures of them here which might help you. If I was you I’d not bother trying to get the specific connector, just use your own connectors, even wago or similar and just make the correct connections

https://community.tado.com/en-gb/discussion/18278/...

Edit too slow it seems other above have found the right one

[Jambur]

CoolHands said:

Pictures of them here which might help you. If I was you I’d not bother trying to get the specific connector, just use your own connectors, even wago or similar and just make the correct connections

https://community.tado.com/en-gb/discussion/18278/...

Edit too slow it seems other above have found the right one

This is why I love Pistonheads. There's always a knowledgeable poster out there

[Jambur]

A quick follow up to this, the Lumberg Rast 3611 connector needs a small modification to fit. There are small keyed plastic tabs that you can snip off with a side cutters. Still worth it, as they are less than a 10th of the price of the official connector from Ideal.