FRONT DOOR STEPS
Author
Discussion

geek84

Original Poster:

611 posts

108 months

Thursday 5th June 2025
quotequote all
Hi Folks

I've had my front door steps put in recently.

However, the guy who did the wok left a hole in the middle of the steps. He said it was for ventilation.

Is he correct? Do I need to put some sort of 'net' in front of the hole to prevent flies etc from going into that hole?

Thanks in advance for your responses.


Cow Corner

680 posts

52 months

Thursday 5th June 2025
quotequote all
If the steps obstruct existing sub floor ventilation, then provision should be made to maintain it.

But not necessarily like that…

I think your best bet as an initial fix would be a nice external metal louvre vent with some insect mesh on the inside face.




BoRED S2upid

20,913 posts

262 months

Thursday 5th June 2025
quotequote all
Nah he’s pulling your leg nobody has a dirty great hole in their FRONT DOOR STEP

zalrak

677 posts

107 months

Thursday 5th June 2025
quotequote all
WHY ARE YOU SHOUTING?

More seriously - is that a piece of (damaged) copper pipe visible in that hole? If so, why is it there and what is it doing?

The Gauge

6,164 posts

35 months

Thursday 5th June 2025
quotequote all
Probably an emergency fire escape for mice, and you’ve either now got a heated step or the copper pipe is there to keep slugs out.

119

16,537 posts

58 months

Thursday 5th June 2025
quotequote all
That is a bit rough tbh.

Skyedriver

22,023 posts

304 months

Thursday 5th June 2025
quotequote all
119 said:
That is a bit rough tbh.
A bit?

119

16,537 posts

58 months

Thursday 5th June 2025
quotequote all
Skyedriver said:
119 said:
That is a bit rough tbh.
A bit?
biggrin

zalrak

677 posts

107 months

Thursday 5th June 2025
quotequote all
119 said:
biggrin
Delicately machined out with one of these:


JoshSm

3,061 posts

59 months

Thursday 5th June 2025
quotequote all
Cow Corner said:
If the steps obstruct existing sub floor ventilation, then provision should be made to maintain it.

But not necessarily like that...
Been there done that, I think when I did it with a brick step plinth that was going in front of a vent brick I managed the ventilation by leaving the vertical joints mostly empty and putting mesh in instead, was easy enough to do at that stage.

I think in the case above doing it for myself I'd have created a vent by drilling a proper array of holes so it looked more finished, but that's just me any not counting the time involved.

Nothing to stop that being cut out bigger and replaced with something a bit more designed.

Simpo Two

90,885 posts

287 months

Thursday 5th June 2025
quotequote all
That's absolutely ridiculous and ugly; what was he thinking of?

If it's really needed, I'd make it neat rectangle or circle and put a decent-looking vent in. A soffit vent perhaps?

zalrak

677 posts

107 months

Friday 6th June 2025
quotequote all
Yes, I think I would be getting them back to fix it properly. That's a proper bodge.