My window is sad!
Discussion
My window has got a case of the winter blues, and is crying to itself
https://youtu.be/kWuUCD0irEU?si=GrpPTzFUUZRpuXMK
Ok, we've got really strong wind and rain at the moment, so rain is obviously getting in.
The upvc double glazing is probably 25 years old now, but has been leak free for the last 15 years with us.
Outside, the top of the window is somewhat shielded by an overhang of tiles.

So water is not directly landing on that bit of the window.
I think rain must be getting through the hanging tiles,

then landing on top of the window internally, and making it's way through the join within the upcoming sections
So would be right in thinking this is a window out job?
Thanks
Ian
https://youtu.be/kWuUCD0irEU?si=GrpPTzFUUZRpuXMK
Ok, we've got really strong wind and rain at the moment, so rain is obviously getting in.
The upvc double glazing is probably 25 years old now, but has been leak free for the last 15 years with us.
Outside, the top of the window is somewhat shielded by an overhang of tiles.
So water is not directly landing on that bit of the window.
I think rain must be getting through the hanging tiles,
then landing on top of the window internally, and making it's way through the join within the upcoming sections
So would be right in thinking this is a window out job?
Thanks
Ian
Agree with both the above. The window is unlikely to be the issue, water is travelling down until it meets the window then ingressing at the aperture.
Find where the point is that the water first gets in, as Aluminati says, that could well be the top line of tiles, just underneath the upper windows cill.
Assuming you do it yourself, at low cost, you could consider applying sticky flashband across the upper part of the top line of tiles as a temporary solution / eliminate that as the cause.
I recently had significant water ingress when we had an unusually strong Northerly wind driving heavy rain into our bedroom window. A small amount of mastic has solved it for the medium term until I get the root cause eliminated next year ( a windows out job to replace the cill).
Find where the point is that the water first gets in, as Aluminati says, that could well be the top line of tiles, just underneath the upper windows cill.
Assuming you do it yourself, at low cost, you could consider applying sticky flashband across the upper part of the top line of tiles as a temporary solution / eliminate that as the cause.
I recently had significant water ingress when we had an unusually strong Northerly wind driving heavy rain into our bedroom window. A small amount of mastic has solved it for the medium term until I get the root cause eliminated next year ( a windows out job to replace the cill).
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff


