A Long Wooden Fascia - Best Option?
Discussion
Hello all.
I've pretty much finished my summer house, it looks great in black Hardie Plank but I would like to make a contrasting fascia from wood. It will be stained a medium oak and then have a few coats of quality varnish applied. If it lasts for three years I'll be happy as it will be exposed to direct sunlight pretty much all day long and all year round.
Needs to be 5m long and then two sides of 4m each. 160mm height.
The obvious answer is some marine ply I guess, 18mm, but it will need two joints to get the width. I'm therefore thinking of maybe a variety of shorter strips, 55mm high and offsetting to give a lot of strength and a relatively nice look. I've got a big enough workshop to make it, plus the tools needed.
Just looking for alternatives from wood, with one possibility being just a planed softwood, cut and glued in the same way as above.
Regarding the three years, wood outside doesn't last forever, and I don't mind redoing once as we'll probably move in five or six years anyway.
Cheers
I've pretty much finished my summer house, it looks great in black Hardie Plank but I would like to make a contrasting fascia from wood. It will be stained a medium oak and then have a few coats of quality varnish applied. If it lasts for three years I'll be happy as it will be exposed to direct sunlight pretty much all day long and all year round.
Needs to be 5m long and then two sides of 4m each. 160mm height.
The obvious answer is some marine ply I guess, 18mm, but it will need two joints to get the width. I'm therefore thinking of maybe a variety of shorter strips, 55mm high and offsetting to give a lot of strength and a relatively nice look. I've got a big enough workshop to make it, plus the tools needed.
Just looking for alternatives from wood, with one possibility being just a planed softwood, cut and glued in the same way as above.
Regarding the three years, wood outside doesn't last forever, and I don't mind redoing once as we'll probably move in five or six years anyway.
Cheers
I bought a 5 metre length of 5 x 1 planed softwood from my local Travis Perkins last week, there were a couple of other planks in the rack that were longer than that as well. The chap who sorted it out said they get bundles of the stuff from the supplier that are various lengths, some up to 6 metres.
Definitely not ply, it doesn't take much for a bit of water to get into exposed edges no matter how well you paint/seal it, and it will start delaminating.
Ideally for longevity you want some type of hardwood that is inherently water and rot resistant, but the cheapest option probably is a planed softwood found at any timber merchants.
Ideally for longevity you want some type of hardwood that is inherently water and rot resistant, but the cheapest option probably is a planed softwood found at any timber merchants.
You should be able to get 5m, you may have to order it specially, 4.8m is usually a standard max length, depending on where you go. It will probably be 5.1m, it works in .3m increments. I’d take the trouble to track it down rather than ply, as said above, the joints will look crap and be a weak point re. water getting in. I can recommend Epifanes varnish btw.
v8notbrave said:
Had a nightmare with wooden fascia, tried all sorts of fancy primer and paint
Got it covered in uPVC, maybe not what u want but just my tuppence
Don't fancy uPVC if I'm honest. I think it would be almost impossible to fix flat over that length, and I would have to fix through the EPDM sheet, which is another problem. With the wood I'm going to try something where it hangs from the roof. (I have a plan, and at worst I will fix through the rubber).Got it covered in uPVC, maybe not what u want but just my tuppence
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff


