Converting battery LED Christmas Lights to mains power
Discussion
I’ve got some Christmas garlands with 100 LEDs, powered by 4 AA batteries (6V, 0.5W).
I’d like to convert them to mains power and ditch the battery box and controller. Don’t need any flashing effects, just permanently on when plugged in.
Happy to rewire. Can I simply use a 6V DC adaptor, or is there more to it?
Any advice appreciated!
I’d like to convert them to mains power and ditch the battery box and controller. Don’t need any flashing effects, just permanently on when plugged in.
Happy to rewire. Can I simply use a 6V DC adaptor, or is there more to it?
Any advice appreciated!
Amazon/ebay etc also do many different versions of these for ease.
https://www.ebay.co.uk/itm/394294861878?_skw=batte...
https://www.ebay.co.uk/itm/394294861878?_skw=batte...
A USB phone charger is probably the easiest, an old low power simple one.
4 alkaline AA's is 6V, but 4 rechargeables is often 4.8V.
I have various random wall warts from long departed gadgets, I expect most people would find something.
If all else fails, I'd use something like a 9 or 12V wall wart and a DC-DC down converter, which would be a couple of quid on ebay.
Or you can buy a new set of lights to run from USB quite cheaply...
4 alkaline AA's is 6V, but 4 rechargeables is often 4.8V.
I have various random wall warts from long departed gadgets, I expect most people would find something.
If all else fails, I'd use something like a 9 or 12V wall wart and a DC-DC down converter, which would be a couple of quid on ebay.
Or you can buy a new set of lights to run from USB quite cheaply...
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff


